Does anyone have, or know of a link to, dimensioned drawings of a Ford Sierra Cosworth T5 gearbox. I need to get the distances from the input shaft centre to the gearbox to bell housing bolt holes.

I found some manuals online in PDF form,im not sure if the T5 box is included in here or not but there is quite a lot of uselful stuff in there even if not exactly what your looking for.

Linky

about 3/4 of the way down under the ford section.

Hi
Can't answer your question but interested to see you're putting a YB into a Velocity. I did the same and jolly good fun it was too (the driving not the putting in - it was a bit of a squeeze). Until the sump hit something that is!