Johneturbo
|
posted on 6/8/10 at 04:45 PM |
|
|
ZZR1400 photos of installs please
After the above just trying to work out how much aggro/hassle/pain in the butt it will be to swap engines from an 05R1
the more piccys the better
|
|
|
INDY BIRD
|
posted on 6/8/10 at 05:37 PM |
|
|
hi there is one in my archive if any good,
lots of money to do this conversion,
engine easy 2k -2.5k
manifold £350
Billet modified sump£750
remote filter housing£150
oil cooler£100
pipe work£?
air filter,£
bonnet scoop as engine is tall £?
engine craddle mods£?
and im sure others will fill in,
lots of power but lots of money,
good luck though
nice engine
|
|
Johneturbo
|
posted on 6/8/10 at 05:59 PM |
|
|
Indy bird thanks
i've had a look, any chance you could take some pics of your chassis/engine mounts please
also where abouts is the gear change linkage is it bulkhead side
engine cost... i'll have my engine package for sale so should offset most of that
|
|
INDY BIRD
|
posted on 6/8/10 at 06:50 PM |
|
|
hi
car runs paddle shift with a cable so not sure about which side it ould run,
this has a bracket on the drivers side bulk head for opperating the leaver,
can do some pics once i get the engine re installed, getting the new enigne tommorow from malc,
the engine mounts directly off the passenger side chassis rail same as zx12, i am not happy with the craddle and mounts so will be altering them once
i get the engine in,
also run a reverse box and the angle looks a bit much so need to alter this,
if you u2u me your email i will send once i get the chance
thanks
sean
|
|
Johneturbo
|
posted on 7/8/10 at 09:42 AM |
|
|
Nice one Sean
i'll u2 my email addy
i've been reading up on Pauls website(paublo999) some good info on angle of prop and the engine, i think he managed to get the airfilter under
the bonnet but later on did fit a scoop as it was a tight fit
cheers
john
|
|
skippad
|
posted on 9/8/10 at 03:35 PM |
|
|
Ive got some photos in my archive.
If u want some recent ones let me know.
Any questions please ask.
Dave
|
|
Smartripper
|
posted on 9/8/10 at 03:50 PM |
|
|
Hello,
Have many pictures off making new mount for a zx14 made the swap after my zx12 blown.
Let me know i can send you in the emaill but i think a cd is better.
Big files and many pictures.
Just u2u me your adress and i will trow in the mail tomorrow.
Daniel
|
|
Johneturbo
|
posted on 9/8/10 at 09:34 PM |
|
|
Dave, i've had a nosey at your archive photos i'll most likely have 1000 questions if i go ahead with the conversion
Daniel that would be great, i've not seen an zzr1400 in an mnr chassis. so yes please i'll u2 my email
|
|