Paul_C
|
posted on 16/1/12 at 10:48 AM |
|
|
Ultra Violet Light Box, Free to good home
Hello,
Not really car related but I have an Ultra Violet Light box designed for exposing Photo Sensitive resist for making DIY PCBs that hasn't been
used for many years. The specifications are:-
Model: Decon 415, Type: UVL-415
Exposure area = 470 x 255 mm, 4 off 15 W tubes, total power 60 W.
Overall dimensions = 625 x 290 x 130 mm excluding hinges and catches
Clockwork adjustable timer, 0 to 6 minutes.
A quick, not recommended, glance at the Ultra Violet light shows that it's working.
The foam on the lid has gone all crunchy and is turning to dust.
It's made of chip board so it's heavy and will need to be collected from Staines (upon Thames).
It's free to anyone who can make use of it.
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
tegwin
|
posted on 16/1/12 at 11:03 AM |
|
|
Already have a lightbox... but if you happen to have a reflow oven or solder dispensing equipment.!?!?
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
wilkingj
|
posted on 16/1/12 at 12:16 PM |
|
|
1st Dibs please...
U2U sent...
Geoff
1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.
Best Regards
Geoff
http://www.v8viento.co.uk
|
|
Paul_C
|
posted on 16/1/12 at 02:09 PM |
|
|
Hello,
I don't have a reflow oven or solder dispensing equipment unfortunately. I think that's a bit beyond amateur electronics. Getting that all
to produce an assembled PCB requires a fair amount of knowledge and experience which I don't have.
|
|
Jaybeee
|
posted on 20/1/12 at 11:05 PM |
|
|
Hi do you still have the lightbox? A friend of mine is a teacher and might be able to use it for the electronics projects with the kids. If you do I
will be at Magna Carta school on Wednesday evning at our engineering group. We use the lathes etc. if your free pop down and meet like minded guys
who bring in things for old cars to work on.
|
|
SteveWalker
|
posted on 21/1/12 at 12:27 AM |
|
|
Elektor or EPE (I can't remember which) have published a couple of projects using a microcontroller to control the temperature of a small,
domestic, electric oven for reflow soldering.
|
|
Paul_C
|
posted on 21/1/12 at 11:25 AM |
|
|
Hello,
I still have the light box wilkingj (Cambridge) expressed an interest but the problem is distance. It's going to be expensive to ship with the
risk of damage.
If I still have the light box next week I can bring it to the school on Wednesday. What hours do the engineering group meet?
|
|
Jaybeee
|
posted on 21/1/12 at 11:22 PM |
|
|
Hi Paul
We are there between 7 and 9 but we have a cup of tea about 7:45-8:00. If you can't make it I could collect it one evening.
Cheers Jason
|
|
Paul_C
|
posted on 22/1/12 at 11:02 AM |
|
|
Hello Jaybeee,
The cup of tea is tempting. I will visit this Wednesday and bring the (heavy) UV box.
|
|