bodger
|
posted on 24/11/12 at 01:01 PM |
|
|
Howto: Cheap LED Flasher Relay.
Apologies if this is old news but I managed to convert one of vauxhall relay corsa vectra astra gm 90 055 543 or 54 201 005
. ( I got mine for £1.45 + p.p. - £6.50 seems a bit steep, search around - any relay with a U243B chip inside should work). However it
doesn't work with the standard Sierra hazard switch wiring UNTIL you remove the bulb from the column mounted hazard switch. Then it works
perfectly. - Not bad for < £4 & 5 mins work.
[Edited on 24/11/12 by bodger]
|
|
|
rusty nuts
|
posted on 24/11/12 at 01:53 PM |
|
|
Unless you have a tell tale warning it will not pass MOT or IVA
|
|
piddy
|
posted on 24/11/12 at 02:00 PM |
|
|
Would fitting a Led bulb in place of the standard sierra hazard bulb solve both problems?
|
|
blakep82
|
posted on 24/11/12 at 02:06 PM |
|
|
Electronic LED Blinker Flasher Relay Fix 3 Pin 12V NEW
<£3 and no work? staright fit, and will work with the tell tale.
have to admit to being a bit confused
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
bodger
|
posted on 24/11/12 at 02:15 PM |
|
|
Tried one of those but it didn't work with the Sierra circuit. Tell tale is provided by the left & right green lights flashing on the bike
clocks.
|
|
piddy
|
posted on 24/11/12 at 02:54 PM |
|
|
I've had two Led flasher relays now the first was a direct replacement for the sierra ones ( lasted five years) the second one had the pins the
opposite way around so I had to remove two of the wires out of the relay base and relocate them.
|
|
Ben_Copeland
|
posted on 24/11/12 at 04:41 PM |
|
|
Same here, cheap ebay one. Everything works as it should
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
jossey
|
posted on 25/11/12 at 09:53 AM |
|
|
Would it work with an led bulb in the tell tale switch...
Thanks
David Johnson
Building my tiger avon slowly but surely.
|
|
L5W
|
posted on 25/11/12 at 10:41 AM |
|
|
quote: Originally posted by jossey
Would it work with an led bulb in the tell tale switch...
Yep, I got an LED tell tale working on my build by adding an earth wire to one of the bulbs terminals and bypassing part of the switch.
a better description and photos in my blog here
cheers
Lee
http://l5w-mk-indy-zetec.blogspot.com/
|
|
Darek32
|
posted on 15/4/14 at 10:46 AM |
|
|
Old post but I have some wiring manual that will help when changing on LED
with 2 pin type Led flasher relay
google source
![](http://i55.servimg.com/u/f55/12/83/02/16/396_ki11.jpg)
|
|