Board logo

clutch cable
alanr - 16/10/06 at 01:18 PM

Hi guys – could any of you tell me what clutch cable you have used as the one in mine is a bit on the short size and has been wearing and fraying at the peddle end, so I am looking to fit a new one

I was at Brands on Saturday and saw a couple of Blades with very long cables fitted which looked like they would be a lot better than mine

A

[Edited on 16/10/06 by alanr]


scoey m - 16/10/06 at 02:53 PM

Hi mate
Give mnr a buzz thats where i got mine from not cheap though but looks like it will last a while


JoelP - 16/10/06 at 02:58 PM

i use a pedal bike brake cable. Once i managed to stop it slipping through it worked fine.


Coose - 16/10/06 at 05:46 PM

Have a look at www.venhill.co.uk - they do cable kits which I can highly recommend. They should be just over a tenner....


ChrisGamlin - 16/10/06 at 07:01 PM

The one that Westfield supply for the Megablade etc is a Mk3 Cortina clutch cable, it has a ring / polo on the end for attaching it to the pedal with a clevis pin so may or may not be suitable for your pedal.