Board logo

front uprights
Miks15 - 21/3/08 at 08:03 PM

does anyone happen to know the dimensions or know the link to a site with the dimensions of the cortina upright.
I am going to use my bmw upright but need to make a bracket to make it work but would also like to use the original wishbone set up as per the book.
Previous Post
Thats my previous post exapling my problem with my upright.
So basically what im trying to do is make mine have the same dimensions as the cortina so it will fit the wishbones.
Thanks

RazMan - 22/3/08 at 05:13 AM

Any good?

Miks15 - 22/3/08 at 09:50 AM

i dont ahve anything to open it with

MikeRJ - 22/3/08 at 11:39 AM

quote:
Originally posted by Miks15
i dont ahve anything to open it with


http://www.edrawingsviewer.com/

gabbes - 25/3/08 at 04:58 AM

It seem to be a text file only...am I wrong_

RazMan - 25/3/08 at 05:33 AM

Not sure why that happens - Right click and 'save as' does the trick though

MikeRJ - 25/3/08 at 09:33 AM

quote:
Originally posted by gabbes
It seem to be a text file only...am I wrong_


Yes, DXF files use a text based format, which is why you need a viewer (or Autocad etc.) to use them.