Board logo

gauges
darrenga - 30/10/06 at 10:17 PM

is there anyone who do sets of gauges,saw some nice moon and dolphin ones at a nsra swap meet but cant seem to find them anywhere. i bought a nice rev counter,but they dont do a speedo or fuel gauge to match.


Aboardman - 30/10/06 at 10:27 PM

you mean these gauges.

http://cgi.ebay.com/ebaymotors/DOLPHIN-6-TAN-PROGRAMMABLE-STREET-ROD-GAUGE-SET_W0QQitemZ230043550770QQihZ013QQcategoryZ80739QQrdZ1QQcmdZViewItem


darrenga - 30/10/06 at 10:28 PM

yes those are the ones, do you know if they would be ok for a pinto


grusks - 30/10/06 at 10:35 PM

i wonder if there ford speed pulse fits a type 9 gearbox or do they do the universal sender (magnets on the prop job)

i could be getting the visa out


Aboardman - 30/10/06 at 11:18 PM

i did ask and i thought they would take a standard magnet and sensor pickup.

but send him a message to be sure.

he quoted me i think $50 for postage.


rayward - 30/10/06 at 11:31 PM

just be aware ,theres a good chance you will get stung by customs which adds an extra 15% +£5 to your total.

Ray


Danozeman - 31/10/06 at 06:59 AM

The proper moons ones are available from a place over here. I spent ages searching to find them. Cant find it now.

Iv seen them at hot rod shows etc and never bought any. I quite fancied a set but have now changed plan.

I was told by a bloke at a show they run the magnet type speedo pick up.


grusks2 - 8/11/06 at 07:38 PM

Ive emailed them several time now about the Speedo pick up etc and had no reply from them

I was also wondering, as they are American, what thread the senders would be, but now reply

Ive found their site but not much to go on.

http://www.dolphingauges.com/


or



http://daytonasp.com/ven/dolphin%20gauges/files/progauges.shtml

Read a few reviews now, and it’s 6 of 1 and half a dozen etc. Some say never had a problem some say the they've had a few problems and dolphin doesn’t want to know.