Well i thought i would say thanks to everyone for their advice and help with the mot issues i have had. tonight i had all my parts and got cracking!
and with the use of the handy search function on this site i have been able to do it all! i now have a new steering arm gaiter, with the removal of
the track arm end and a wrestling match over the track rod v gaiter! then had a play witht the carbs as the idle was set to high, now i have it set at
1k (is this ok???) and as some of you may remember the steering rack was rubbing on the engine! well turned out its not the engine its the altenator,
so after having a play its all adjusted and sorted and now have about 30-40mm of clearance. so tommorow the lower ball joint and then im done!!!!!
so seen as the girlfriends away tonight ive ordered a pizza (on the joint card tee hee!) and thought id have a couple of beers, but no beer! so
i'm living like a king with a questionable bottle of 'champagne'
anyone else rewarding themselves? (how long will it take for someone to make the obvious joke, you sick pervert!)
I picked up the plug leads from Manecore for the V6 Fury in my garage (cash + no VAT = result ) , then spent a couple of hours making throttle linkage bits - now relaxing in front of an open fire with a JD'n'coke in hand
quote:
Originally posted by clairetoo
open fire
quote:
Originally posted by clairetoo
JD
i went out earlier with tony for a blat in his turbo powered locost, now im watching the F1 practice session on bbc sport website. haven't had
time to get in the garage today but i have all the weekend to play in the garage
haven't got any beer though, but i have just devoured the most delicious trifle!
Ive had a crap day
Tin top needs a clutch and will do a cambelt and water pump at the same time.
Any way five ours to get two nuts and one bolt out of an exhaust manifold
And my good old dremel has packed in
No beer in the fridge either
quote:
Originally posted by Benzine
quote:
Originally posted by clairetoo
open fire
quote:
Originally posted by clairetoo
JD
Careful!
Cleared some more of my garage out, need to do the stuff up in the roof now, stop some leaks, remove some ivy which is intruding and stop lime mortar
falling onto everything! Once thats done I just need to kit it out with a decent bench and storage
Oh and I burnt all of the junk which I pulled out too
quote:
Oh and I burnt all of the junk which I pulled out too
I've had a great evening playing with my injection map and the new wideband. I've setup the Emerald ECU to adaptive and remapped chunks as
much as -20% on the fuel. It runs much better and had about 5 blasts out and back.
Funny thing is I met a guy from Belgium who also has a Locost with a 4AGE!
JC
quote:
Originally posted by 55ant
quote:
Oh and I burnt all of the junk which I pulled out too
people are always out to make a few quid on ebay or give it to someone else. Recyclings ok, but burning stuff is so much cooler
quote:
Originally posted by l0rd
quote:
Originally posted by 55ant
quote:
Oh and I burnt all of the junk which I pulled out too
people are always out to make a few quid on ebay or give it to someone else. Recyclings ok, but burning stuff is so much cooler
Breaking stuff is even better.
Mixed evening here TBH
The Indy was on eBay with auction finishing at 21:30 - didn't make reserve despite 1,400 hits, 88 watchers and 10 bids. Having really psyched
myself up for it going I'm now annoyed it didn't - still the tax and insurance run to the end of Nov so it means I'll get a few more
miles in
Also managed to "potentially" buy another Sierra 2.0 Pinto Estate (a local barn find) to compliment the Sierra 2.0 Pinto Hatch I picked up a
couple of weeks ago (now sat in another local barn). So plenty of donor bits around me for a new project. Now need to find a 205 body shell to start
hacking up
Homemade curry by SWMBO which was to her usual very high standard and complimented with a couple of beers and some popadums
Off to Brum tomorrow to stay with some old friends and eat curry/drink beer
Happy Weekend to all!