Ive refrained from making this post up until now, but as you don't seem to be taking my u2u's seriously or not replying to them at all (yes
everyone knows you can tell if you have read a u2u) I feel I have no choice.
The fact is I want the fuel tank I paid you to build for me at the start of decemeber. I have been patient with you for over 2 months and have not
quibbled when you have let delivery dates slide until today. I even told you last month my tax and mot was up and without a fuel tank I cannot take it
to be mot'ed. So I am now paying inusrance on a car I cannot use.
You told me at the begninning of the week that I would have the tank today. I went into work on my day off to take reciept of the tank and as of
6:30pm I have nothing. I even u2u'ed you yesterday to confirm today, but as you read the u2u and couldn't be bothered to reply I have wasted
a day
If you cannot fulfill what you said you could do for me last year, I would like my money back so I can get someone more reliable to make my tank, like
GTS.
Thanks
Shaun
Ouch- the GTS comment is a bit pointed I'm sure it will get sorted....
Ooo, I'm off for some pop-corn......
quote:
Originally posted by Confused but excited.
Ooo, I'm off for some pop-corn......
quote:
Originally posted by Steve G
quote:
Originally posted by Confused but excited.
Ooo, I'm off for some pop-corn......
Salt on mine please matey - while you're there.![]()
I know I should pay attention.
But who's Deneo?
Contact Martin Keenan he will make you one and they are good quality mkengineering.co.uk
petrol tank
Austin man i would do that but it cost me £100 for the tank and an extra £10 for the postal order to pay him with.
sweet pop corn is bad for the teeth
I will just get my hat and coat and go out this could take a while
ps who is deano ?
[Edited on 2/12/2010 by DRC INDY 7]
quote:
Originally posted by designer
I know I should pay attention.
But who's Deneo?
quote:
Originally posted by Ben_Copeland
quote:
Originally posted by designer
I know I should pay attention.
But who's Deneo?
Think he was making/seller tanks....
Well .... if he is/was, he is/was NOT a Registered Trader!
Fozzie
how do you become a registered trader?
pay fozzie 1 million dollars.
haha!!!!!
quote:
Originally posted by cd.thomson
pay fozzie 1 million dollars.![]()
LOL ..... I wish!
Is there any way that his details can be made available to the buyer?? regardless of a trader status or not there has been an injustice.
Beware who you recommend....
http://www.locostbuilders.co.uk/viewthread.php?tid=126860
http://www.locostbuilders.co.uk/viewthread.php?tid=126272
quote:
Originally posted by Angel Acevedo
Beware who you recommend....
http://www.locostbuilders.co.uk/viewthread.php?tid=126860
http://www.locostbuilders.co.uk/viewthread.php?tid=126272
all in the post out of my hands
I'm sorry but i don't think that is much of an update.
Did you post them today or two weeks ago?
Should Shaun be worrying its lost in the post?
quote:
Originally posted by deneo
all in the post out of my hands
Nice to know customer service still exists
quote:
Originally posted by prawnabie
Austin man i would do that but it cost me £100 for the tank and an extra £10 for the postal order to pay him with.
quote:
Originally posted by deneo
all in the post out of my hands
quote:
Originally posted by deneo
all in the post out of my hands
Still have no tank!!! Deneo when did you despatch it and who did you use? Do you have any tracking information?
I would appreciate more than a one sentence response this time!
I believe my tank was made by deano via mnr- i dont know him or what you agreed but can vouch its a great tank and well made.
My tank arrived today from deneo. Luckily it wasnt a great rush or me,
I hope yours arrives soon if it hasnt already.
Yes my tank arrived too!!
I am far from happy with it though. the wole tank is twisted to the point where it rocks about when you put it on a flat surface. The one corner is
12mm off the floor when the opposite corner is touching.
If you put a ruler over the welding on the sides there is a 6mm gap in the middle when the ruler is touching the ends.
I have no interest in talking to deneo over this now. He rarely responds to my u2u's and if he does its only a few words of dis-encouragement. I
have his phone number but I know if I give him the tank back he would have to completley remake it to correct the errors which would take god knows
how long and I need the car on the road asap as I am moving house soon.
In the future I will NOT be recommending him, in fact I will be doing the opposite!
Thanks to everyone who has u2u'ed me offering to help, it is much appreciated!
Very sorry to hear that, i agree that 12mm off the ground is a lot of distortion and isnt good enough. If it were 1-2mm, you can't really do much
about it.
Oh Well, Good Luck in whatever your next step may be.
should the chap who made it be offering 2 sort it out or supply another tank?
quote:
Originally posted by prawnabie
one corner is 12mm off the floor when the opposite corner is touching.
Deneo has made two tanks for me and there the dogs . think you should phone him and speak to him. If you count the number of people on here who have praised his workmanship you'l see your problems are not the norm and I'm pretty sure he'd attempt to rectify them.
He is in no way inclined to rectify the problems unless i send the tank back at my expense. I could understand him saying that if I had made a mistake in my measurements, but the tank is warped, out of shape on almost every weld and he has even welded the alloy with the protective plastic still attached to it. I will never do business with him again, and were possible I will be recommending that people on here do not do business with him.
You should post some photos, it seems to me he's sent you a crap one on purpose. If he's good enough to make ones that get described as 'dogs danglies' then he would definately have know it was shite.
eeek
quote:
Originally posted by cd.thomson
pay fozzie 1 million dollars.![]()
![]()
quote:
Originally posted by mangogrooveworkshop
eeek![]()