Board logo

Locost Bespoke Rollcage
MakeEverything - 6/3/10 at 06:17 PM

Does anyone know of anyone that can do me a bespoke rollcage for the kit car?
Being a fibreglass body that i cant remove, and the roof a funny shape, it needs to be quite clever.

It may even need welding inside the car with a TIG. I was thinking about using 40mm scaffolding, and if i can get the tubes bent to the correct angles, i could do it myself i suppose.

boggle - 6/3/10 at 06:22 PM

i could help you out there...

but dont use scaffold pole thou

Ben_Copeland - 6/3/10 at 06:46 PM

Have a chat to Welderman....

He's done a few for people, and they all have been happy with his work.. including me.

[Edited on 6/3/10 by Ben_Copeland]

MakeEverything - 6/3/10 at 06:58 PM

quote:
Originally posted by boggle
i could help you out there...

but dont use scaffold pole thou


Im going to re_IVA my car and call it a Boggle GTA!!!

I was looking today, and i dont think that it will be too long until i think about bodywork.
Ive got a week off after easter, so im hoping to get shed loads done that week.

big_wasa - 6/3/10 at 08:10 PM

can I have your old v5 ?

[Edited on 6/3/10 by big_wasa]

MakeEverything - 6/3/10 at 09:34 PM

quote:
Originally posted by big_wasa
can I have your old v5 ?

[Edited on 6/3/10 by big_wasa]



That would be ringing...

(lets talk pound notes!!! )

big_wasa - 6/3/10 at 10:32 PM

sssshhhh thats a dirty and miss-understood term