Hi

In an attempt to kick start my build and improve my CAD skills I have been re-creating my work so far in Turbo Cad. I'm now at the point of trying to add in the donor parts which is involving quite a bit of disassembly measuring etc. which in itself I find quite enjoyable / educational.
However to save me tearing down a MkII Escort steering rack, XR 4x4 LSD, MT 75 gearbox, bolt on driveshafts etc. does anyone know of an on line source of Ford engineering drawings?

Regards Mick

Hi Mick,
I have done the chassis and some other bits but i couldnt find any where with drawings of ford bits, might be worth checking all the build diaries with cad, someone else has probably done it, if not you can be the first resource

Hi

Mabe if we can pull a few together who have already done some bits we could set up a drawing that contains all the donor parts between us.
Im a design engineer, id be willing to spend some time measing/drawing

Any thing in here?

i have an mt75 gearbox solid model - its only the outside shape but its taken from a ford drawing - i may have that somewhere too? the drawing was also only the outside shape
oh and it was all fairly roughly done... lol not like my cortina upright! couldnt fit the gearbox on the cmm

U2U your emalil address and I will forward what I have.