Board logo

Wheel Guards
cridgey - 29/12/10 at 02:40 PM

Hi there does anyone know about wheel guards on the IVA test as mine only cover the top of the tyre and not the bottom due to the suspension set-up?

snapper - 29/12/10 at 02:49 PM

You need to have a good look at the diagram in the IVA manual.
If the correct area of tyre us not covered it's a definatelly fail.
It's not easy to describe but once you see the diagram it's not difficult to visualise

[Edited on 29/12/10 by snapper]

speedyxjs - 29/12/10 at 02:55 PM

Have you got a picture of it? May be easier to advise

ReMan - 30/12/10 at 01:44 AM

quote:
Originally posted by cridgey
Hi there does anyone know about wheel guards on the IVA test as mine only cover the top of the tyre and not the bottom due to the suspension set-up?


Yo must have siome BIG camber going on.
is it a beetle chassis?

cridgey - 30/12/10 at 01:19 PM

Hi there been trying to up load images but will not let me?

Also the rear wheel guard must terminate above or below150mm of the wheel centre?