Board logo

whats this fixing called???
AndyW - 27/1/13 at 04:32 PM

Hi all,

I can think for the life of me what this fixing would be called. Its basically a flat square with a threaded stud coming off it. I have seen them before but cant remember a name to do a search.
I want them so i can put the flat part on the nosecone and through a bracket. The flat part then does not affect the bonnet fitment!

Any help appreciated.

Andy

ReMan - 27/1/13 at 04:36 PM

Not a car battery terminal bolt/screw?
Or a stud weld fixing?

rusty nuts - 27/1/13 at 04:47 PM

Big head??

ReMan - 27/1/13 at 04:48 PM

http://www.shop4fasteners.co.uk/acatalog/Mild_Steel_Threaded_Stud_Bonding_Fasteners_15mm_Square.asp

Antother possibility , Racking bolts?

ReMan - 27/1/13 at 04:48 PM

quote:
Originally posted by rusty nuts
Big head??


No I was just trying to be helpful

loggyboy - 27/1/13 at 04:55 PM

Square head bolt?!

AndyW - 27/1/13 at 05:05 PM

quote:
Originally posted by ReMan
http://www.shop4fasteners.co.uk/acatalog/Mild_Steel_Threaded_Stud_Bonding_Fasteners_15mm_Square.asp

Antother possibility , Racking bolts?


Thats the type of thing

Thank you!!

rusty nuts - 27/1/13 at 07:34 PM

Try Googling Big head bonding fasteners


[Edited on 27/1/13 by rusty nuts]

hootsno1 - 27/1/13 at 07:54 PM

I used a m10 bolt and ground the head down till its about 1mm thick then ground the gel coat down to get the head of the bolt to sit flush and glued it in place