Board logo

Hello everyone!
jyardley - 13/7/14 at 09:50 PM

Hi there everyone..... First post on Locost Builders.

Well three weeks ago I finally bought my first Locost, and after a two week shake down today was the first 'mod' day, first job was to ditch the cable op. Clutch and go hydraulic. Here's a few photos of today's efforts if anyone's interested. Re made a light weight pedal, top pivot assy., mounts for the cylinders even had time to plumb it all in for the drive home.

Next is the re-wire.












prawnabie - 13/7/14 at 11:05 PM

Top work and welcome!

Shaun


samjc - 13/7/14 at 11:32 PM

Welcome and looks a great job. Thats one meaty pedal did you make it ? Also what push type slave cylinder are you using ?


jyardley - 14/7/14 at 07:15 AM

Hi there,

Yup all made.... Most defiantly the 'first draft' as I wasn't sure if the geometry would be correct, but the pedal feels very nice now.... Both slave and master cylinder are Land Rover Defender items, cheap, alloy & plentiful!

James


samjc - 14/7/14 at 08:59 AM

Shame i dont have the room for a pull type as it was my original plan. How did you make the pedal ?


jyardley - 14/7/14 at 09:31 AM

What's a pull type?

The pedal was made on a milling machine.


paulf - 19/7/14 at 01:07 PM

Nice neat job but why did you feel the need to convert to hydraulic clutch?
Paul


jyardley - 19/7/14 at 10:43 PM

Hi Paul,

To be honest it was done a whim.... The cable broke about a week after having the car on the road, the previous owner/builder had no idea about mechanical advantages and the pedal had a rediculas amount if travel.. So decided to go for a complete redesign... The nice thing about this setup is that both the position of the pedal and the throw are completely adjustable, so great for quick track day changes or more controlled city driving.