Hi Guys,

Just went to wire up my OBD2 in my Striker with a Blacktop Zetec on standard ECU, but the wires on the OEM guide don't seem to marry up to what i have.

As you can see from the picture, the wires on my car seem to be different:








Does anyone have any idea which wires i should be using?

Thanks,
Andy

[Edited on 2/10/20 by pekwah1]

[Edited on 2/10/20 by pekwah1]

This is one for Bigwasa, He will hopefully be along shortly and advise

Don't worry about the colours just the pin numbers.

I guess you have a random obd2 from another car. Just pull the green slide from the back and you can move, remove or add pins.

Mondeo or Focus ecu ?

Hi thanks, yeh guess I’ll need to pull the ECU out to trace the pins.
It’s from a year 2000 Mondeo, maybe an OWL5

The picture, is that of the obd2 plug ?

The colours should be as listed for the owl5 but I have seen all sorts.
You only need three pins from the ecu two earths and a switched live.

The pictures from the ECU plug, I had to get a new OBD2 socket which I’ve wired with the colours you suggest on the OEM guide.

Again think I’ll just have to take the ECU out and trace the wires