Board logo

Where do I find tubing for misalignment bushes?
jps - 28/12/20 at 10:28 AM

After much searching I can’t find any suitable tubing with a 1/2” ID that I can use to make some misalignment bushes for my spherical bearing ended shocks. Am I missing an obvious supplier or would these normally need to be turned from solid bar?

davspeed - 28/12/20 at 11:41 AM

quote:
Originally posted by jps
After much searching I can’t find any suitable tubing with a 1/2” ID that I can use to make some misalignment bushes for my spherical bearing ended shocks. Am I missing an obvious supplier or would these normally need to be turned from solid bar?

Have a look at McGill motorsport on ebay Iv'e had many orderes from them
https://www.ebay.co.uk/itm/M14-Metric-Misalignment-Spacers-Washer-for-use-with-Rod-Ends-4x-Pack/162089640004?hash=item25bd4ba044:g:uQkAAOSwZQRYeK3n />
https://www.ebay.co.uk/itm/M12-to-M10-High-Misalignment-Angle-Reducer-Reducers-Spacers-Rod-End-Joint-x2/162226102861?hash=item25c56de24d:g:47MAAOSw5sB bj8-b

jps - 28/12/20 at 02:55 PM

Thanks, it’s really some plain tube I’m after so I can make them to fit.