Now let the fun commence.

The guys at MK are building my book chassis it'll be ready next sat.

Sorted out a hire van and collecting the engine, wheels and chassis all in one day from different parts of uk lol. So if next sat you see a guy driving a Belper Hire van, up and down the M1 several times with a smirk like a cheshire cat give us a honk

nice one,take plenty of photo's and keep us updated,what engine have you decided on

Its a 1300 xflow. It were driven into a garage and removed cause some guy wanted to build a rs2000, so free to a loving home

Was running and in good nick

Hi if its definatly for the race championship make shure they supply you with the right wishbones as supplied to james odonnel last week otherwise despite what they tell you youl be bending lower bones every 10 laps they definetly know of the problem hence the newer wishbone set top and bottom.

cheers matt

i'm just having the chassis off em, going to make my own wishbones

Hi and also get them to put the extra chassis members in as well this will save you having to put them in later as you definatly need them. They are pictured in the regulations.

cheers matt

Matt,

I am not sure which members you mean, do you have any diagrams?

ta

Hi sorry not been around all weekend just read your post . THere is a diagrame in the locost regulations whith the recomended tubes highlited. also should consider a tube all the way across the car mid way along the seating area this is to help support the the side intrusion bar on the rollcage witch is a must but not compulsarry.
cheers matt

Ta Matt,

Just emailed MK the drawing, hope they dont mind

Carl