Board logo

Viper powered 7
CraigJ - 30/5/07 at 10:31 PM

http://i12.photobucket.com/albums/a240/focusv8/viper/frontsus.jpg


A guy of passion ford is building this fecker. Take a look.
http://www.passionford.com/forum/viewtopic.php?t=263842

arrybradbury - 30/5/07 at 10:37 PM

bj928 is his username on here - do a small search - it's not so locost

bigrich - 30/5/07 at 10:50 PM

take a look in the luego section of this forum think its a guy called big john and his mate wiring mark

Rich

omega0684 - 30/5/07 at 11:19 PM

two words

F*****N MENTAL !

jollygreengiant - 31/5/07 at 03:37 AM

quote:
Originally posted by bigrich
take a look in the luego section of this forum think its a guy called big john and his mate wiring mark

Rich

Yep they ARE the ones.

KEEP UP at the back there.

They are going to try and have it at Newark as a rolling (possibly running) chassis). So we (From the Luego section) will see you all there then, Stand 53.

Bluemoon - 31/5/07 at 07:36 AM

Nice bit of fun, but with 500+ftbl and 500bph, in a 7! It's going to be a complete hand-full I doubt you will every be able to get that kind of power/torque down in a 7 it's just going to wheel spin..

Dan

JAG - 31/5/07 at 07:41 AM

I tend to agree with Bluemoon - too much engine for a Se7en.

02GF74 - 31/5/07 at 07:49 AM

there is a engine valve on the left hand stand but what is that on the right one?