Board logo

Small rose joints?
CraigJ - 8/6/07 at 08:02 PM

I need 2 small rose joints. m12 female with a 12mm hole. wheres the best place to look? any local places will be great.

Alan B - 8/6/07 at 08:18 PM

Your local bearing distributor would be a good bet I'd say.

TGR-ECOSSE - 8/6/07 at 08:26 PM

Try this guy on ebay thats where i got mine. Realy good bloke to deal with McGill Motorsport

owelly - 8/6/07 at 08:30 PM

RS?? ?

nitram38 - 8/6/07 at 08:35 PM

quote:
Originally posted by TGR-ECOSSE
Try this guy on ebay thats where i got mine. Realy good bloke to deal with McGill Motorsport


I second this guy!

oadamo - 8/6/07 at 08:52 PM

quote:
Originally posted by TGR-ECOSSE
Try this guy on ebay thats where i got mine. Realy good bloke to deal with McGill Motorsport


i mailed this guy 2 times cus i wanted 16 rose joints and he never mailed me back crap service
adam

jacko - 8/6/07 at 08:57 PM

Maybe from Newark show next weekend

RichardK - 8/6/07 at 09:07 PM

3rd OK for McGill from me, there is a guy on here called Nick Skidmore that could help as well.

Cheers

Rich

JoelP - 8/6/07 at 09:20 PM

i mailed mcgill, and he got back with an offer. Seemed a straight enough bloke.

nitram38 - 8/6/07 at 09:21 PM

quote:
Originally posted by oadamo
quote:
Originally posted by TGR-ECOSSE
Try this guy on ebay thats where i got mine. Realy good bloke to deal with McGill Motorsport


i mailed this guy 2 times cus i wanted 16 rose joints and he never mailed me back crap service
adam


Try his ebay shop

I built the F1-2 using rod ends that cost half of other suppliers and I bought another 30 for my current project X.
You might have emailed him on a redundant email or he was away?

Taz Surfleet - 9/6/07 at 10:16 AM

Try Nick Skidmore have had two or three lots from him always fast freindly and well priced. Send him a U2U am sure hell be able to sort you something out.