Board logo

Finally started!!!
Miks15 - 15/1/08 at 08:19 PM

Finally started my project! and about time
completely stripped the interior of my BMW, and the front end is now off
next step is the engine removal
Once ive got all the running gear off and can start preparing my chassis

another thing...
i hear alot that you need to show proof that you built your chassis? how does this work as ive bought a chassis someone else built?
do you have to show photos etc or that for something else?

Thanks guys


davie h - 15/1/08 at 08:22 PM

good luck mate

oh and by the way i can sell you some pictures of my chassis build if you want

Davie


Miks15 - 15/1/08 at 08:27 PM

haha
do you actually need to show photos then?
i do need to change the rear end for IRS tho
so iwill take plenty of pics of that... will that be enough?


donut - 15/1/08 at 09:00 PM

Some SVA stations require you toshow important welds where they are hidden, a classic example is the harness brackets.

Here is mine which later got covered by bodywork.

Harness bracket
Harness bracket


Best just to take photo's as you go along. You can store them in your pic archive so we can see how you are getting on

Good luck with the build, sounds interesting what with the BMW running gear.

[Edited on 15/1/08 by donut]


Miks15 - 15/1/08 at 09:03 PM

cheers andy ill bare that in mind
try to take some photos of important ones
i need to sort some out anyway
the guy i bought it off may not of been the best welder so a couple ill need to redo anyway


ditchlewis - 16/1/08 at 09:07 AM

As andy said.

i took along photos of things that were hidden and they were very happy with that.

ditch


Miks15 - 16/1/08 at 11:21 AM

cheers for all your help,
i will bare all of it in mind when starting on my chassis

cheers again