Board logo

Silvertop Water Pump Pulley
AntonUK - 4/2/12 at 12:54 PM

Hi All,
I have been trying to source a Silvertop ribbed water pump pulley for a few weeks but with no luck.

Ford can supply one at 25quid plus vat which isnt very locost imo.

Nothing in my local scrappy

ebay has nowt (I did get a pump & pulley combined but it was a smooth pully )

Burton power dont do them either.

Any ideas where I could get one?

Edit: Spelling

[Edited on 4/2/12 by AntonUK]

big_wasa - 4/2/12 at 02:36 PM

I was going to have a ride to the scrapie to day untill I went out to do a job for a mate.......I soon came back in.

How much of a rush are you in ? I can pick one up but its going to be £10~11 posted. I will be working next saturday so it wont be for a couple of weeks atleast.

AntonUK - 4/2/12 at 02:46 PM

Yeah if you find oneI'll take it... No serious rush, got plenty to be getting on with

big_wasa - 4/2/12 at 02:59 PM

Ok I will pick one up. No problem if you get sorted, I will bung it on ebay.

monck - 4/2/12 at 03:14 PM

i think i may have one on my old silvertop ill check

geordielad - 4/2/12 at 03:30 PM

i need one too please

AntonUK - 4/2/12 at 03:34 PM

quote:
Originally posted by monck
i think i may have one on my old silvertop ill check


great let me know.

austin man - 4/2/12 at 09:03 PM

The escort engine has it on not sure wheter the fiesta has the same

big_wasa - 4/2/12 at 09:16 PM

yep fiesta orion and escort

big_wasa - 18/2/12 at 01:27 PM




£12 posted

AntonUK - 18/2/12 at 03:21 PM

quote:
Originally posted by big_wasa



£12 posted


Done!
You have U2U

i_froloshki - 23/2/12 at 01:29 PM

i still need one of these.... anyone?

JAMSTER - 23/2/12 at 01:56 PM

i used to run a smooth pulley with a ribbed belt

big_wasa - 8/3/12 at 06:57 PM

I will see if I can get a couple more.

Getting one out at the scrapie means pulling out the power steering bottle. Leave the belt on and undo the four bolts (very tight on space, 8mm spanner) Cut the belt. You then need to lever the engine over a touch to get the pulley past the chassis leg.

i_froloshki - 8/3/12 at 07:34 PM

eeee do not get so much trouble for such a small think. I will use the not grooved one ' it works ok, i already made the alternator work and i think it will be fine. Btw i made a very neat alternator tensioning system because of lack of space. I will make some pics tomorrow.