Board logo

Renault 5 Turbo
paul v6 - 19/10/05 at 05:55 PM

I have been offered a mint 190bhp R5 turbo engine with all ancilaries for a very very reasonable price, but you guessed it!!

What gearbox to use???????

I've read through the archives and found little to help so I'm hoping somebody has found a solution recently.
There has to be an option thats not too much hard work!!

Paul


Danozeman - 19/10/05 at 06:24 PM

Them engines can give trouble.

Best bet is probably to get a bell housing made up for a type 9.


paul v6 - 19/10/05 at 06:46 PM

I know they must be like rocking horse poop but what about a Renault Fuego box??


paul v6 - 19/10/05 at 07:05 PM

Or a RWD volvo box thats not a rear mounted type??

There must be a way around this??


owelly - 19/10/05 at 07:18 PM

rear mount it complete with gearbox. Or is that too obvious


gazza285 - 19/10/05 at 07:20 PM

quote:
Originally posted by paul v6
I know they must be like rocking horse poop but what about a Renault Fuego box??



Alright, apart from being a transaxle design.


andybod - 19/10/05 at 07:39 PM

some early renault traffics are rwd or how about dacia duster but not sure if transfer box was seperate from the gear box or remove bell housing from volvo 340 and see if it could be adapted to fit type 9 box


Volvorsport - 20/10/05 at 10:14 AM

wouldnt a type 9 , be a little fragile on such a motor ?

bellhousing from a 340 could possibly work , but they have a tailshaft housing bolted on, so they can be quite small in that area , its obvious to me to bang on a transaxle and stick it in the back !!

otherwise , id be picking a more reliable motor , altho i do have stocks of pistons and liners !!


caber - 20/10/05 at 07:00 PM

Dacia Duster? Is this not a Renault 12 clone? If so I think it is front wheel drive with the engine in line behind transaxle. Renault 16 engine and transaxle were the same period as the original 12 and these were the original power transmission unit for the Lotus Europa.

Caber