I'm looking for a plate to fit on a 2.3 Duratec similar to this

dry sump

but with an outlet as well

[Edited on 29/4/08 by phongshader]

If you could get one for a dry sump you may be able to tap the other port in.

You could try Titan or Pace for the plate.

Alternatively, Raceline do a plate that mounts the spin on filter straight out and you can get oil cooler sandwich plates that provide the 2 ports.
I am looking at doing this at the moment for mine.

Cheers,

Colin

I made one from a block of Ally and tapped it with 1/2BSP tap then screwed in 2 male to male adapters from Think Auto. It worked out a lot cheaper than a Raceline filter adapter. I'll grab a photo at lunch.

Paul.

quote:

---

Originally posted by Doofus
I made one from a block of Ally and tapped it with 1/2BSP tap then screwed in 2 male to male adapters from Think Auto. It worked out a lot cheaper than a Raceline filter adapter. I'll grab a photo at lunch.

Paul.

---