Board logo

Fiesta Endura Engine
MKMike - 16/9/08 at 08:12 AM

Does anyone know the correct valve clearances for a 97 Mazda 121/Fiesta with a 1.3 Endura Engine?
Are they surpose to be adjusted with the engine cold?

Myke 2463 - 16/9/08 at 09:08 AM

KA with the 1.3 endura engine. Inlet 0.20mm Cold From Dec 96 Exh 0.50 cold,

Regards Mike.

MikeRJ - 16/9/08 at 03:55 PM

Going by the way they sound, about half an inch.