Miks15
|
| posted on 4/5/10 at 08:20 PM |
|
|
GSXR 600 carbs/airbox/trumpets
Hi guys,
I need to sort out some sort of filter for my carbs. But also do i need the trumpets? If i buy the airbox will the trumpets be in it?
How do they mount on the carbs? there dont seem to be any fixing holes, is there a rubber bits that slots over the carb with the trumpet on the other
side?
what have other people using gsxr600 carbs done?
Thanks
Mikkel
|
|
|
|
|
Lars
|
| posted on 4/5/10 at 08:44 PM |
|
|
if the carb ones are the same as tbs then the trumpets fit onto the the end and held in place with a metal clamp.
the trumpets are actually the bits that hold the airbox to the tbs, so if you get an airbox with mounting rubbers, than thats what you are after.
|
|
|
Lars
|
| posted on 4/5/10 at 08:48 PM |
|
|
i ended up using a fair bit of the airbox.
temp sensor
trumpets
i actually used the section with the trumpets in and just bolted them to the filter back plate (they have a nice ridge that fits into the trumpets)
the remainder of the airbox makes a good tray (for draining oil,coolant )
also have a spare map sensor now
|
|
|
Miks15
|
| posted on 4/5/10 at 09:27 PM |
|
|
ahh cool, will get an airbox then and see what i can get from it.
Cheers
|
|
|
blakep82
|
| posted on 4/5/10 at 10:56 PM |
|
|
have a look at one of my recent threads about zx9r trumpets, i assume gsxr600 carbs will be the same
http://www.locostbuilders.co.uk/viewthread.php?tid=135170
[Edited on 4/5/10 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Miks15
|
| posted on 4/5/10 at 11:31 PM |
|
|
look like just the thing i need, just biught an airbox so lets home its what comes
|
|
|
