beaver34
|
| posted on 20/12/10 at 06:48 PM |
|
|
external wastegate flanges
hi,
can any one on here make external wastgate flanges? i know afew people do stuff like this, hopefully they might be cheaper than eBay as they seem alot
for not much money
thanks
|
|
|
|
|
blakep82
|
| posted on 20/12/10 at 06:50 PM |
|
|
andyw7de
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Antnicuk
|
| posted on 20/12/10 at 08:43 PM |
|
|
if you buy an external wastegate, it will quite often come with the required flange for welding on, especially one of the V band versions. Having had
both, the V band ones are much easier to work with.
I found these work well and they come with the flanges for the manifold and the screamer pipe.
60MM Wastegate -V BAND 1jzgte / SR20DET / JDM *RED* on eBay (end time 24-Dec-10 13:12:44 GMT)
or this type
46MM EXTERNAL 4 BOLT TURBO WASTEGATE on eBay (end time 27-Dec-10 05:13:10 GMT)
600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!
|
|
|
beaver34
|
| posted on 20/12/10 at 08:46 PM |
|
|
i got a turbosmart item, did come with any, although ive just spoke to my engine builder he is going to laser cut some
thanks though
|
|
|
