Printable Version | Subscribe | Add to Favourites
New Topic New Reply
Author: Subject: Robin Hood Lolocost parts
andylancaster3000

posted on 26/8/04 at 12:42 AM Reply With Quote
Robin Hood Lolocost parts

When flicking through the latest Kitcar mag I came across an advert for RH lolocost parts and was amazed by the price of some of their parts. Mainly the stainless manifolds for £50!!!

I don't seem to understand why quite a few people in this forum are so anti Robin Hood. Am I missing something, is the quality very low etc.?

Andy.

View User's Profile View All Posts By User U2U Member
JoelP

posted on 26/8/04 at 07:14 AM Reply With Quote
yes! but not everything, you just have to be careful with what you get. I got twin roll hoops, and as you could imagine there isnt much they can do wrong on those. Likewise, ball joints and similar stuff, all good. However, by all accounts, bodywork and similar is trouble (hearsay, not personal experience).

but the price is very low.

BTW, i think lolocost is seperate from robin hood now? maybe?

[Edited on 26/8/04 by JoelP]






View User's Profile View All Posts By User U2U Member
ChrisW

posted on 26/8/04 at 10:02 AM Reply With Quote
My only advice... make sure you see what it is you're buying beforehand and that the price is sufficiently lower than elsewhere to take a risk on the no returns policy.

The guy who owns it is a right idiot. He was prepared to rubbish his own product in front of a load of potential customers, (I challenged him on his stand at Stoneleigh) saying it was my problem and I was the one stupid enough to buy it. This was over a refund of a £15 product that was mail ordered.

I will never buy anything from them again!

Chris





My gaff my rules

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
locogeoff

posted on 26/8/04 at 10:31 AM Reply With Quote
I was thinking of buying the standard nosecone and some swept wings from them, has anyone got experience of these components? I would rather not drive all the way down there to find they are absolutely keek. Cheap is good if the quality is o.k. but I would have a long way to go to look at poor quality fibreglass

On the manifold front, I received their catalog yesterday and read that they have quite good links with stainless steel manufacturers as they buy quite a lot for their kits, this could explain why they can flog stainless stuff quite cheap

View User's Profile Visit User's Homepage View All Posts By User U2U Member
andyps

posted on 26/8/04 at 11:47 AM Reply With Quote
I have a Lolocost nose cone sat in front of me here in my office (one advantage of being self employed, there is no one to complain about bits of car in the office!!) - I would say the quality is OK. Main problem is that it looks like it was moulded from a nose which had a badge on it as there is a distinct mark where there probably was a Lotus/Caterhan badge - I will just put something there myself when I eventually have something to put the nose on.





Andy

An expert is someone who knows more and more about less and less

View User's Profile E-Mail User View All Posts By User U2U Member
James

posted on 26/8/04 at 01:33 PM Reply With Quote
I've bought some good stuff from them for very little money- ball joints, rear lights, Sierra steering column bush and various other bits and bobs.

I'm a littl dubious about the bodywork though- I definately noticed the nose cones had that funny bulge in the nose.
Also noticed that they're slightly miss-shapen- they don't sit 'square' on the floor which is a shame as they're a good price.
It may well not be noticeable when on the car- or maybe with the brackets in place it would be forced back into shape!

Having said that I haven't seen them since Newark so maybe they've changed the moulds since then.

HTH,

James

View User's Profile View All Posts By User U2U Member
Mix

posted on 26/8/04 at 02:07 PM Reply With Quote
No problems whatsoever with the ball joints I bought from them. Delivery was very prompt aswell.

Mick

View User's Profile Visit User's Homepage View All Posts By User U2U Member
dave1888

posted on 26/8/04 at 02:48 PM Reply With Quote
they will not be doing a manifold for a zetec unfortunetly






View User's Profile View All Posts By User U2U Member
barrie sharp

posted on 26/8/04 at 03:31 PM Reply With Quote
The saying 'you get what you pay for ' is very apt. for them
I been happy with most things and when I have returned things they have always replaced /refunded for them..
I didnt like the look of the bodywork so I didnt buy it,its a choice.
being fair to them lolocost is there name and they produce goods at a low price !
tfyt Barrie





the cars looking good" a blind man would be pleased to see it"
''stop press'' the blind mans seen it said "it felt ok"

View User's Profile E-Mail User View All Posts By User U2U Member
Mark Allanson

posted on 26/8/04 at 06:18 PM Reply With Quote
Everything is sold assuming you will do the 'fettling' yourself. The fettling varies from removing sharp edges to remaking the stuff yourself





If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation

View User's Profile Visit User's Homepage View All Posts By User U2U Member

New Topic New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.