Mark100
|
 posted on 8/6/12 at 09:35 PM |
|
|
formula 27
Any formula 27's in or near yourkshire that i could pop round to see take endless pictures of and measure all over ?????????? thanks Mark
|
|
|
|
|
Proby
|
| posted on 8/6/12 at 10:32 PM |
|
|
Not anywhere near Yorkshire, but if you need any pics or measurements in particular, give me a shout and I'll do my best to assist!
|
|
|
ali f27
|
| posted on 9/6/12 at 07:15 AM |
|
|
Not all that near but ask away if you need info
|
|
|
Mark100
|
 posted on 9/6/12 at 07:53 AM |
|
|
its basicaly front and rear forks as i only bought a chassis no books etc then a good look over one to see how others have done things most of mine
will be odd as im not useing the sierra / ford gear but could do with a look at how the bodywork is fixed etc dont mind a drive its a couple of
hours away from the wife after all 
|
|
|
Myke 2463
|
| posted on 9/6/12 at 11:50 AM |
|
|
Try this http://formula27ownersclub.moonfruit.co.uk/
Be Lucky Mike.
|
|
|
Mark100
|
| posted on 9/6/12 at 02:30 PM |
|
|
i have done mike loads of times filled in the contoact us details about 5 times now heard nothing back thanks anyway
|
|
|
Proby
|
| posted on 9/6/12 at 03:34 PM |
|
|
The guy who was running the F27 owners club has given it up. I got a response about 12 months ago after contacting through the website. He bought a
TVR and sold his F27, so no longer really had any interest in running a club.
By forks, do you mean wishbones??
|
|
|
Mark100
|
| posted on 10/6/12 at 07:06 AM |
|
|
ye prody it the wishbones im stuck on the rests no problem realy just curious more than anything jsut need to get some specs on them and ill be off
and running the general geometry is what im after to as ill be useing bigger hubbs and brakes than the sierra so ill need to mod i suppose heres
hopeing a 1jzgte fits in the bay ok
|
|
|
Proby
|
| posted on 10/6/12 at 08:30 AM |
|
|
I'll get it out the garage an take some pics of the front rocker/wishbone setup for you.
|
|
|
Proby
|
| posted on 10/6/12 at 08:34 AM |
|
|
PS: a 1jzgte may be a very tight squeeze!
|
|
|
