pekwah1
|
| posted on 2/4/17 at 08:24 PM |
|
|
Blacktop pulley bracket
Hi guys,
I need a bracket for my blacktop to mount a pulley at the top right of the engine where people normally do so that we can use the standard water
pump.
Any ideas where I can buy one from?
I know the answer will be to make one myself but don't have a welder etc and my last one wasn't the best...
Cheers
Andy
|
|
|
|
|
r1_pete
|
| posted on 2/4/17 at 09:36 PM |
|
|
Burton used to do them, not cheap iirc though....
|
|
|
femster87
|
| posted on 3/4/17 at 06:33 AM |
|
|
If you mean for mounting alternator pulley. I should have one in the workshop. I dont have the pulley though. I can get the pulley number. I'll
check first and let you know.
Similar to the raceline one
http://www.raceline.co.uk/products/part_section.asp?SectionID=60&CategoryID=4
[Edited on 3/4/17 by femster87]
|
|
|
pekwah1
|
| posted on 3/4/17 at 09:02 AM |
|
|
that would be great, thanks!
|
|
|
redturner
|
| posted on 4/4/17 at 10:48 AM |
|
|
You don't need a welder but a grinder would be handy. I cut mine out of a piece of 6 mm plate, drilled holes in the correct place and mounted a
spare adjuster pulley. This ensures the pump will run in the correct direction.....
|
|
|
pekwah1
|
| posted on 4/4/17 at 10:50 AM |
|
|
Got any photos of where you mounted it?
|
|
|
redturner
|
| posted on 4/4/17 at 12:07 PM |
|
|
Not handy but I can go to the car tomorrow...
|
|
|
pekwah1
|
| posted on 4/4/17 at 02:01 PM |
|
|
Nice one, much appreciated!
|
|
|
