eddymcclements
|
| posted on 24/6/05 at 10:39 PM |
|
|
It runs!!!!
This might be one of the longest ever builds...over 3 1/2 years...but at last I've fired up the engine. Runs a treat - was ticking over smoothly
at 600rpm but I've upped it a bit to 800rpm. Haven't had it out on the road or track yet, but it takes off like a rocket on our close.
Web update and pics at:-
http://www.whirl.plus.com/
Please note new address if you have any links to my site.
What's next? I've filled in the SVA form and sent it off, I'm covering the sharp edges and putting a large diameter padded edge on
the bottom of the dash. My main problem is the speedo - I have a VDO from a Caterham but I would think the gearing will be all wrong for my 3.92 diff,
6x22 worm and gear in the gearbox and 13" rims with 185x60/13 tyres. Anyone know how to work all this out?
Cheers,
Eddy
|
|
|
|
|
stevebubs
|
| posted on 24/6/05 at 11:02 PM |
|
|
congrats...feels good when it first starts, doesn' t it?
|
|
|
phil_far
|
| posted on 25/6/05 at 05:43 AM |
|
|
Eddy,
I started building my car in 2001 and today I am still not finished!
So your are not alone mate 
Starting the engine is a boost of motivation and I am going to fire up mine agian before final dismantling, painting and re-assembly!
Your baby looks so sweet 
Cheers
Philip
|
|
|
scutter
|
| posted on 25/6/05 at 08:41 AM |
|
|
Great feeling isn't it
Started my build in November 1999 only started the engine last month.
Hoping it's going to be like a fine wine getting better with time
ATB Dan.
|
|
|
wicket
|
| posted on 26/6/05 at 09:13 PM |
|
|
Looking good Eddy.
We are 3 yrs & 4 months into the build but getting close to being ready for SVA now. As Eddy the engine is as removed from the donor, just cleaned
and painted. Turned it over 2 wks ago to check compression and everything looks OK, should be starting it up in a couple of weeks from now. Definitely
looking forward to the first drive even though it will be very short up the drive and back, round trip of about 100 ft !!!
|
|
|
ayoungman
|
| posted on 28/6/05 at 12:26 PM |
|
|
started mine April 2003. Still working towards a rolloing chassis ! Money/ time tends to slow me down !
"just like that !"
|
|
|
DEAN C.
|
| posted on 29/6/05 at 07:14 PM |
|
|
Nice one Eddy!
As you know I've been watching your build closely as we both started out at about the same time on very similar lines .
All the best, DEAN.
Once I've finished a project why do I start another?
|
|
|
phelpsa
|
| posted on 1/7/05 at 12:53 PM |
|
|
I was a follower of your site when I first got mine
How do you fit 13" wheels over discs?
Adam
|
|
|
