Oh....buggerit!
My speedo has decided to stop working over the last couple of days - not a good thing in a car that can break speed limits at the touch of the
throttle.
Plugged a little test circuit into the wires that go from the sender to the speedo - and the sender's on the blink. Not the end of the world -
except that it's one I made, which plugs into the speedo cable outlet on the gearbox. And do I have an access panel? Do I b*ggery! 
Now I have to cut out an access hole in the side of the transmission tunnel - I've just spent half a day removing the dash, opening up the
tunnel, removing the remote gearshift, and so on.
Then I thought that while I was in there I might as well grease up the propshaft - can I get the grease gun to lock onto the nipples? Can I b*ggery!
End of general-purpose rant - normal service will now resume...
David
[Edited on 4/6/06 by David Jenkins]
|
