scootz
|
posted on 15/5/12 at 12:49 PM |
|
|
Buying Steel... (Calling Welderman!)
Aaaargh... if I had hair on my head I'd have pulled it all out by now!
4130, T45, CDS, ERW!? Tube or Pipe!? OD's, Inches, Fractions, Decimals, Swg's!?
FFS, I just want to buy two 1.5m lengths of steel to make my front suspension beam with. Something like this...
It needs to be strong as the whole front suspension effectively hangs off the ends... lighter would be good, but no unobtanium (as I'm skint!)!
The biggest PITA in the whole process (apart from me being a complete and utter bunghole) is that the only thing that's important to me is the
ID of the tube / pipe... and yup... no suppliers list the ID of their steel!!! Buggerations... I wish I'd paid even a teeny weeny bit of
attention in maths classes!
I need 49.5mm (or nearest size available) ID for the bottom tube and 45.9mm (or nearest size available) ID for the top one
Can anyone who knows their (steel) onions help out Mr Thicky MacGump!?
A 10% discount on any (of the inevitable) future Scootz Sales awaits!
Joe... Joe...Joe...JOEEEEEEEEEEEEEEEE!!!!!!!!!!!!
It's Evolution Baby!
|
|
|
designer
|
posted on 15/5/12 at 01:11 PM |
|
|
Couldn't you adapt an old VW Beetle front end?
|
|
scootz
|
posted on 15/5/12 at 01:40 PM |
|
|
quote: Originally posted by designer
Couldn't you adapt an old VW Beetle front end?
I could... but it would be a faff, so I won't.
It's Evolution Baby!
|
|
welderman
|
posted on 15/5/12 at 02:00 PM |
|
|
I is without intenweb at work so on mi eye phone.
Will see what eye can cum up wi
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
bonzoronnie
|
posted on 15/5/12 at 02:03 PM |
|
|
Pipe is measured on its inside diameter & tube is measured on its outside diameter.
What sort of wall thickness material are you looking for Scott ?
I can look it up in my ASD metals book if I can get some rough parameters of what you are looking for ![](/images//smilies/smile.gif)
|
|
scootz
|
posted on 15/5/12 at 02:11 PM |
|
|
quote: Originally posted by welderman
I is without intenweb at work so on mi eye phone.
Will see what eye can cum up wi
U is a star!
It's Evolution Baby!
|
|
scootz
|
posted on 15/5/12 at 02:13 PM |
|
|
quote: Originally posted by bonzoronnie
Pipe is measured on its inside diameter & tube is measured on its outside diameter.
What sort of wall thickness material are you looking for Scott ?
I can look it up in my ASD metals book if I can get some rough parameters of what you are looking for
Thanks Ronnie... I'm probably looking for a 2-3mm wall thickness.
It's Evolution Baby!
|
|
welderman
|
posted on 15/5/12 at 02:18 PM |
|
|
STAINLESS 304 = 48.4id / 50.3od and 45.1id / 48.3od
MILD STEEL = 49.92id / 50.398od and 45.52id / 50.8od
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
scootz
|
posted on 15/5/12 at 02:24 PM |
|
|
You typed all that on an eye phone!? Good work fella!
The mild steel options look the closest size wise, but the walls are prolly a wee bit too thin.
Thanks for having a look though mister!
It's Evolution Baby!
|
|
welderman
|
posted on 15/5/12 at 02:32 PM |
|
|
i think maybe could get thicked wall, will check
Thank's, Joe
I don't stalk people
http://www.locostbuilders.co.uk/forum/23/viewthread.php?tid=172301
Back on with the Fisher Fury R1
|
|
scootz
|
posted on 15/5/12 at 02:40 PM |
|
|
Cheers (and no panic Joe... there's no rush!).
Would 'mild' be ok for the application?
It's Evolution Baby!
|
|
Steve Hignett
|
posted on 15/5/12 at 02:55 PM |
|
|
quote: Originally posted by scootz
Cheers (and no panic Joe... there's no rush!).
Would 'mild' be ok for the application?
"Could" be better...
|
|
bonzoronnie
|
posted on 15/5/12 at 03:11 PM |
|
|
Drawn a blank in my little book Scott
Plenty of round section in there but only gives the wall thickness's & outside diameters.
Me too dumb to work out the inside diameters ![](/images//smilies/bigsmile.gif)
I am sure Welderman will come up trumphs ![](/images//smilies/smile.gif)
|
|
scootz
|
posted on 15/5/12 at 03:23 PM |
|
|
No probs Ronnie. Thanks for trying!
It's Evolution Baby!
|
|
iank
|
posted on 15/5/12 at 04:33 PM |
|
|
Inside Diameter = Outside Diameter - 2*wall thickness
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
scootz
|
posted on 15/5/12 at 04:43 PM |
|
|
quote: Originally posted by iank
Inside Diameter = Outside Diameter - 2*wall thickness
I'm not that thick Ian
I've been skittering about various suppliers. Some are using inch fractions, others mm's, others swg. There's even a few who use a
mish-mash of all three!
I'm just struggling to find two tubes of the same grade of material that get within a mil of my requirements.
I'v attached the pic below of a VW beam, so folks can see the relevance of the ID above all else.
It's Evolution Baby!
|
|
T66
|
posted on 15/5/12 at 05:29 PM |
|
|
I can dodge down to my local metalsupermarket, who has a fairly big stock of tube.
What exactly do you want ? If you get a decision Im happy to go measure and buy on your behalf. Will be next week ...
Youve seen my tubes, you could hang most things off them. 38mm cds
[Edited on 15/5/12 by T66]
|
|
scootz
|
posted on 15/5/12 at 06:29 PM |
|
|
Cheers Ivo... will give you a bell.
It's Evolution Baby!
|
|
T66
|
posted on 15/5/12 at 08:46 PM |
|
|
quote: Originally posted by scootz
Cheers Ivo... will give you a bell.
Im in at work the next 2 days - take your pick when you ring, if I dont answer Im out, and will ring you back. . I could go down on Wednesday next
week...
To save on the heavy postal costs, probably easier if I post it up to you in 6" lengths ? then just weld it back together..
|
|
slingshot2000
|
posted on 15/5/12 at 09:06 PM |
|
|
quote:
To save on the heavy postal costs, probably easier if I post it up to you in 6" lengths ? then just weld it back together..
Almost spilt me tea there !
Would have been even cheaper if you had done this before the Royal Mail put up the price of 1st class stamps by almost one billion % !
|
|
scootz
|
posted on 16/5/12 at 06:11 AM |
|
|
quote: Originally posted by T66
To save on the heavy postal costs, probably easier if I post it up to you in 6" lengths ? then just weld it back together..
Great thinking Batman!
It's Evolution Baby!
|
|