jambo
|
| posted on 26/11/08 at 10:08 PM |
|
|
mnr supplied rmd quick release boss.
any one fitted this to the sierra column.
do you just hacksaw the column and weld the rmd splined piece on or is there a better way like a staggared joint and perhaps a collar over?
|
|
|
|
|
Davey D
|
| posted on 26/11/08 at 10:43 PM |
|
|
Ive got one on my VortX, but MNR supplied the steering column already modified. It looks like they have just cut the original end off, and welded this
one on 
|
|
|
Flamez
|
| posted on 27/11/08 at 07:43 AM |
|
|
quote:
Originally posted by Davey D
Ive got one on my VortX, but MNR supplied the steering column already modified. It looks like they have just cut the original end off, and welded this
one on
ditto got mine from mac1 and the same. Also the switchgear on the shaft was lathed smooth cylindrical.. neat really.
my build mac1motorsports
|
|
|
marc n
|
| posted on 27/11/08 at 09:15 AM |
|
|
must have a solid slug inside the two parts,
do not butt weld 
best regards
marc
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
finlay
|
| posted on 29/11/08 at 01:20 PM |
|
|
quote:
Originally posted by Davey D
Ive got one on my VortX, but MNR supplied the steering column already modified. It looks like they have just cut the original end off, and welded this
one on
hi Davey
dont suppose you have a photo of the splined shaft welded on to the coloum ?
cheers
Finlay
|
|
|
