thunderace
|
posted on 23/12/08 at 03:06 PM |
|
|
changing the pdc on alloy wheels who can do it.
hi im looking for someone in scotland or some advice on how to change the pdc on my alloys.(i can redrill the whole easy its the tapered bit im not
sure of.)
![](http://i17.photobucket.com/albums/b54/SCOTTSCOTLAND/dutton/DSCF3-1-1-1.jpg)
|
|
|
Mr Whippy
|
posted on 23/12/08 at 03:12 PM |
|
|
a good machine shop will have everything needed for this simple task. Use yell.com and look up machine shop etc like this one below -
Sprite Engineering Ltd
10, Lenziemill Rd, Cumbernauld, Glasgow, Lanarkshire G67 2RL
Tel: 01236 457970
Classification: Engineering Machine Shops
Fame is when your old car is plastered all over the internet
|
|
carpmart
|
posted on 23/12/08 at 03:16 PM |
|
|
Without appearing pedantic (I hope!), its PCD not PDC.
From memory, it stands for Pitched Circle Diameter!
You only live once - make the most of it!
Radical Clubsport, Kwaker motor
'94 MX5 MK1, 1.8
F10 M5 - 600bhp Daily Hack
Range Rover Sport - Wife's Car
Mercedes A class - Son's Car
|
|
Hellfire
|
posted on 23/12/08 at 03:16 PM |
|
|
Bear in mind that the centre bore size may also be different.
Phil
|
|
chrisg
|
posted on 23/12/08 at 03:18 PM |
|
|
Make sure that the bit you want to drill is as thick as where the original holes are - some alloys are thickened out around the holes.
Cheers
Chris
Note to all: I really don't know when to leave well alone. I tried to get clever with the mods, then when they gave me a lifeline to see the
error of my ways, I tried to incite more trouble via u2u. So now I'm banned, never to return again. They should have done it years ago!
|
|
Mr Whippy
|
posted on 23/12/08 at 03:33 PM |
|
|
nice wheels btw
Fame is when your old car is plastered all over the internet
|
|
MakeEverything
|
posted on 23/12/08 at 03:33 PM |
|
|
I wouldnt do it. I would get different wheels with the multiple PCD or ford PCD. The wheels are the first thing that will hit potholes, speed bumps
etc, and there is no give between the wheel and the hub.
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
mr_pr
|
posted on 23/12/08 at 03:45 PM |
|
|
Had a friend do it for some alloys for his corsa. Insurance companies wouldn't touch him because of it.
If you don't declare it then you might end up like the recent landy driver in the news!
My Build Progress
|
|
thunderace
|
posted on 23/12/08 at 03:56 PM |
|
|
quote: Originally posted by Mr Whippy
a good machine shop will have everything needed for this simple task. Use yell.com and look up machine shop etc like this one below -
Sprite Engineering Ltd
10, Lenziemill Rd, Cumbernauld, Glasgow, Lanarkshire G67 2RL
Tel: 01236 457970
Classification: Engineering Machine Shops
LOL I KNOW THE OLD GUY THATS IS Sprite Engineering
|
|
mcerd1
|
posted on 23/12/08 at 04:36 PM |
|
|
Have you ever thought it might be easier to modify the hubs ?
also what size are the centre bores (ford are 63.4mm I think)
quote: Originally posted by carpmart
Without appearing pedantic (I hope!), its PCD not PDC.
From memory, it stands for Pitched Circle Diameter!
not quite - its "Pitch Circle Diameter" ![](/images//smilies/bigsmile.gif)
[Edited on 23/12/08 by mcerd1]
|
|
COREdevelopments
|
posted on 23/12/08 at 07:27 PM |
|
|
i had my rear hubs re-drilled to accept ford pcd. used a local engineer and he done a spot on job, i wouldnt drill them out if i were you, get a good
machineshop to do it.
atb
Rob
|
|
nick205
|
posted on 23/12/08 at 09:40 PM |
|
|
Re-drilling the hubs and fitting new studs has to be the way to go mechanically and cosmetically. A simpler job, but still best done with the correct
equipment.
|
|
Alan B
|
posted on 30/12/08 at 02:06 PM |
|
|
quote: Originally posted by carpmart
Without appearing pedantic (I hope!), its PCD not PDC.
From memory, it stands for Pitched Circle Diameter!
And without appearing pedantic likewise it's pitch not pitched.....
![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif) ![](/images//smilies/bigsmile.gif)
|
|