Dan.
|
| posted on 24/6/09 at 09:59 PM |
|
|
New Project....
Hi all,
Just thought I would introduce myself...
I'm dan and live in Peterborough. I have been toying with the idea of building my own car for the last couple of years and have finally decided
to take the plunge!
I will obviously be looking for as much help and advise as possible from you guys  (also will contribute to the forum after payday as I have already
read so muc good advise!)
My plan in to....
Take one volvo T5 engine (not sourced yet but on the look out!)
Add one volvo M90 box (I have managed to source this after much searching!)
So that is the only definates of the build....
Now I need to source a dif ideally an LSD any ideas welcome, the gear ratios of the volvo box are:
3.91:1 1st
2.20:1 2nd
1.38:1 3rd
1.00:1 4th
0.70:1 5th
After I have the engine and dif sourced I will start work on a chassis, again looking for recomendations on a good hanling chassis which will be
suited to the above kit. The volbo gearbox is short but quite wide projecting into the direction of the drivers footwell so a chassis with extra width
in this area would be preferable.
Not sure if anyone on this forum have done a similar build but if you have your advise would be much appreciated.
Any info and links to usefull sites / threads would be greatly appreciated.
Oh and this is my worksop where I will be completing the buid:
[img] [/img]
[img] [/img]
|
|
|
|
|
tegwin
|
| posted on 24/6/09 at 10:00 PM |
|
|
That workshop is tiny.... you wont be able to build ANYTHING in there!
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
Steve G
|
| posted on 24/6/09 at 10:01 PM |
|
|
Thats your workshop!!! I hate you already!!!
Welcome to the lunatic asylum anyway 
|
|
|
omega0684
|
| posted on 24/6/09 at 10:03 PM |
|
|
well you've gone and done it know, you will have everyone queuing up to get in there!
welcome to the mad house!
|
|
|
eddie99
|
| posted on 24/6/09 at 10:06 PM |
|
|
Welcome to the mad house, good luck with your build. This forum will sort out any issues you ever have, well it has done with me :p
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
blakep82
|
| posted on 24/6/09 at 10:14 PM |
|
|
 wish mine was like that!
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Volvorsport
|
| posted on 24/6/09 at 10:18 PM |
|
|
ey up , i think weve spoken previously .
ive got a lovely 3.3:1 Volvo Final drive axle to keep it in t' family .
www.dbsmotorsport.co.uk
getting dirty under a bus
|
|
|
Dan.
|
| posted on 24/6/09 at 10:27 PM |
|
|
Thanks for the welcome guys!
I'm loving my workshop it isnt completly mine I share it with 2 other mates but only one is there regularly so its just like having my own place
with the advantage of 3 sets of tools!
quote:
Originally posted by Volvorsport
ey up , i think weve spoken previously .
ive got a lovely 3.3:1 Volvo Final drive axle to keep it in t' family .
Indeed we have, it was you who got me onto this moneypit (forum) I suspect I am going to end up far more poor now becase of you! 
Still it looks like a great resorce so cant complain too much
|
|
|
matt.c
|
| posted on 24/6/09 at 11:01 PM |
|
|
Nice choice of engine. But.............
Its a bit BIG! You are going to have to have a rather large chassis for it too.
Have you thought about using a smaller engine? 
|
|
|
eccsmk
|
| posted on 24/6/09 at 11:07 PM |
|
|
i agree with matt
a nice small light engine would be better
and if by chance you could get such an item with a built in gearbox
|
|
|
Dan.
|
| posted on 24/6/09 at 11:13 PM |
|
|
quote:
Originally posted by matt.c
Nice choice of engine. But.............
Its a bit BIG! You are going to have to have a rather large chassis for it too.
Have you thought about using a smaller engine?
Indeed it is a cool engine thogh a little large... but wanted to do something a bit different from the norm, I know there have been a couple of others
built so should hopeflly be able to get some advise off the builders of those. The height of the engine should be able to be dopped a bit by fitting a
drysump. Other than that a big shoe horn may be required!
Have seen larger engines in similar cars so it is possible if not ideal for handling.
Where is the fun in following the trend
|
|
|
alistairolsen
|
| posted on 25/6/09 at 08:02 AM |
|
|
quote:
Originally posted by matt.c
Nice choice of engine. But.............
Its a bit BIG! You are going to have to have a rather large chassis for it too.
Have you thought about using a smaller engine?
Mine WILL be going in the standard book chassis
[Edited on 25/6/09 by alistairolsen]
|
|
|
Dan.
|
| posted on 25/6/09 at 09:24 AM |
|
|
quote:
Originally posted by alistairolsen
quote:
Originally posted by matt.c
Nice choice of engine. But.............
Its a bit BIG! You are going to have to have a rather large chassis for it too.
Have you thought about using a smaller engine?
Mine WILL be going in the standard book chassis
[Edited on 25/6/09 by alistairolsen]
So your doing a T5 build too? Do you have a build thread?
|
|
|
BenB
|
| posted on 25/6/09 at 10:03 AM |
|
|
quote:
Originally posted by eccsmk
i agree with matt
a nice small light engine would be better
and if by chance you could get such an item with a built in gearbox
 quality
|
|
|
smart51
|
| posted on 25/6/09 at 11:04 AM |
|
|
a 3.31 volvo diff with 195/50/15 tyres will give you:
30.4 MPH in 1st
54.1 MPH in 2nd
86.2 MPH in 3rd
118.9 MPH in 4th
169.9 MPH in 5th
70 is at 2470 in top
at 6000 RPM, which sounds all right. A 3.62 sierra LSD gives slightly shorter figures of:
27.8 MPH in 1st
49.4 MPH in 2nd
78.8 MPH in 3rd
108.8 MPH in 4th
155.4 MPH in 5th
70 is at 2700 in top
|
|
|
Dan.
|
| posted on 25/6/09 at 01:31 PM |
|
|
quote:
Originally posted by smart51
a 3.31 volvo diff with 195/50/15 tyres will give you:
30.4 MPH in 1st
54.1 MPH in 2nd
86.2 MPH in 3rd
118.9 MPH in 4th
169.9 MPH in 5th
70 is at 2470 in top
at 6000 RPM, which sounds all right. A 3.62 sierra LSD gives slightly shorter figures of:
27.8 MPH in 1st
49.4 MPH in 2nd
78.8 MPH in 3rd
108.8 MPH in 4th
155.4 MPH in 5th
70 is at 2700 in top
Thanks very much was just about to knock up an excel spread sheet to work that out.... saves me the effort
Having said that I think I might start to make one with as many calculations as I can think of that are needed when building a car so it may be added
to the site for other users to download and use
|
|
|
Volvorsport
|
| posted on 25/6/09 at 05:45 PM |
|
|
quote:
Originally posted by BenB
quote:
Originally posted by eccsmk
i agree with matt
a nice small light engine would be better
and if by chance you could get such an item with a built in gearbox
quality
oooooh , naysayers the lot of ya .
where else would you want to hear the high pitched 5 cylinder doing its job .
just think of this .
http://www.youtube.com/watch?v=tZNST1CEkpc
www.dbsmotorsport.co.uk
getting dirty under a bus
|
|
|
matt.c
|
| posted on 25/6/09 at 10:09 PM |
|
|
quote:
Originally posted by Volvorsport
quote:
Originally posted by BenB
quote:
Originally posted by eccsmk
i agree with matt
a nice small light engine would be better
and if by chance you could get such an item with a built in gearbox
quality
oooooh , naysayers the lot of ya .
where else would you want to hear the high pitched 5 cylinder doing its job .
just think of this .
http://www.youtube.com/watch?v=tZNST1CEkpc
Thats one big turbo!!
|
|
|
iank
|
| posted on 26/6/09 at 07:47 AM |
|
|
quote:
Originally posted by matt.c
quote:
Originally posted by Volvorsport
just think of this .
http://www.youtube.com/watch?v=tZNST1CEkpc
Thats one big turbo!!
With just a tad of lag if my ears are working right.
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
alistairolsen
|
| posted on 26/6/09 at 08:28 AM |
|
|
quote:
Originally posted by Dan.
quote:
Originally posted by alistairolsen
quote:
Originally posted by matt.c
Nice choice of engine. But.............
Its a bit BIG! You are going to have to have a rather large chassis for it too.
Have you thought about using a smaller engine?
Mine WILL be going in the standard book chassis
[Edited on 25/6/09 by alistairolsen]
So your doing a T5 build too? Do you have a build thread?
yeah I am, I do have a thread, but its not up here yet as theres not a huge amount to see!
Deciding to use a mazda mx5 donor, BMW gearbox, volvo engine etc didnt simplify things!
|
|
|
Dan.
|
| posted on 26/6/09 at 03:00 PM |
|
|
quote:
Originally posted by iank
quote:
Originally posted by matt.c
quote:
Originally posted by Volvorsport
just think of this .
http://www.youtube.com/watch?v=tZNST1CEkpc
Thats one big turbo!!
With just a tad of lag if my ears are working right.
Not supprising given the engine / turbo size combinaion, still lots of power out of 2.5 litres! I will be happy with a non laggy ~300HP out of mine
|
|
|
