alistairolsen
|
| posted on 5/6/11 at 07:12 PM |
|
|
Who can supply roll cage tube bent to drawings?
Has anyone had custom roll hoops or anything made up?
Cheers
My Build Thread
|
|
|
|
|
austin man
|
| posted on 5/6/11 at 07:19 PM |
|
|
MK Engineering, Mk Sportscars I believe welderman off this forum also
Life is like a bowl of fruit, funny how all the weird looking ones are left alone
|
|
|
ianclark1275
|
| posted on 5/6/11 at 09:15 PM |
|
|
MNR did mine.
i prefer the hoop to be bent at >90 deg, looks much better than "square ones"
its upto you.
IC
measure twice, cut once, scrap it, start again.
|
|
|
b14wrc
|
| posted on 6/6/11 at 11:27 AM |
|
|
What was welderman's typical price for this?
20vt powered rear engined locost
|
|
|
iank
|
| posted on 7/6/11 at 06:17 AM |
|
|
See also this thread
http://www.locostbuilders.co.uk/forum/2/viewthread.php?tid=156542
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
mark chandler
|
| posted on 28/6/11 at 09:44 PM |
|
|
Matt here provided mine in 1 5/8" CDS from drawings:
churpycheap
He charged £155 for front hoop, two side bars and diagonal.
Regards Mark
|
|
|
flibble
|
| posted on 29/6/11 at 07:57 AM |
|
|
protection and Performance in Lancashire did my rear hoop to my measurements, was about £45+P&P if I remember
correctly, they were quick too.
|
|
|
.jpg)
