bigdrew
|
posted on 28/11/11 at 10:41 PM |
|
|
Floor line (for Radius exept front area)
Following on from this old thread: http://www.locostbuilders.co.uk/viewthread.php?tid=47403
Is it still possible to do this for IVA? I.e. is the floor line still determined through the same method and crucially is it still determined
'except for bodywork' as for the note in the picture from the SVA guide from the previous thread.
I already have my front indicators mounted in the same way with on a very solid bar.
From the manual (section 16 Exterior Projections) it appears the cone is still used but I'm not sure if the ruling around it has changed and I
really don't understand the wording!
|
|
|
snapper
|
posted on 29/11/11 at 06:41 AM |
|
|
The photo in the previouse thread shows the indicators to far out IMHO
400mm to outer edge of the indicator min and that looks more like 250
Edges on suspension are not hard to cover, nut covers and shrink wrap over yoga mat etc.
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
wicket
|
posted on 29/11/11 at 12:37 PM |
|
|
Surely its 400mm MAX to the outer edge of the indicator.
|
|
blakep82
|
posted on 29/11/11 at 12:44 PM |
|
|
quote: Originally posted by wicket
Surely its 400mm MAX to the outer edge of the indicator.
correct
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
bigdrew
|
posted on 3/12/11 at 04:22 PM |
|
|
Thats how I saw it.. Anyone know about how the floor line is calculated though?
|
|
PeterV
|
posted on 16/12/11 at 09:29 AM |
|
|
My WLR failed on the floor line radius.
The floor line is now the line at which the testers Dalek (affectionatly known as Len at VOSA Norwich) type cone touches the lowerst bodywork of the
car. Even if this changes as he/she goes around the car from what I saw. So I've no idea how you'd go about calculating this!
Exmainer did say my car would have passed the SVA test as the floor line determination was diffrent back then.
Confused??? But busy buying sticky trim none the less.
|
|