Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Turbo -v- Supercharger
scootz

posted on 15/3/12 at 12:46 PM Reply With Quote
Turbo -v- Supercharger

I was about to ask if a BEC is better than a CEC, but then figured I should rake up an even older and more widely discussed topic!

I'm not so much concerned about what makes more power, rather than...

1. Typically, which is the easier install?
2. Which typically costs more?







It's Evolution Baby!

View User's Profile View All Posts By User U2U Member
nick205

posted on 15/3/12 at 01:00 PM Reply With Quote
I would have thought a turbo install is generally easier and probably cheaper. They're more widely available, more flexible in terms of placement withing the engine bay, they don't require changing engine pulleys/drive belt arrangements....etc.






View User's Profile View All Posts By User U2U Member
beagley

posted on 15/3/12 at 01:07 PM Reply With Quote
^^ Funny, because I would have said the exact opposite.

With a TC I feel like there is all the extra exhaust plumbing that must be done, whereas with a SC you just need to add it prior to the intake manifold. Locations are somewhat limited with a super charger, but seems there is less to muddle with overall.

FWIW

One sec... lemme get my popcorn for the rest of this thread.





I'm not scared!!! I'm just marking my territory.

View User's Profile View All Posts By User U2U Member
adithorp

posted on 15/3/12 at 01:08 PM Reply With Quote
Answers to your Q...
1. Turbo
2. Supercharger
3. V8/BEC... someone always comes along sooner or later and think one of those two is the correct answer to any "which is best Q.





"A witty saying proves nothing" Voltaire

http://jpsc.org.uk/forum/

View User's Profile View All Posts By User U2U Member
scootz

posted on 15/3/12 at 01:13 PM Reply With Quote
What about longevity of the blower itself... is it pretty much eeksy-peeksy between the two different types?





It's Evolution Baby!

View User's Profile View All Posts By User U2U Member
beagley

posted on 15/3/12 at 01:21 PM Reply With Quote
That I don't have experience with, but I think the best solution to your dilemma is to just make a twin charged lump. Then you can have both and settle the argument once and for all.





I'm not scared!!! I'm just marking my territory.

View User's Profile View All Posts By User U2U Member
coozer

posted on 15/3/12 at 01:27 PM Reply With Quote
5.7L V8, all the horses and torque you will ever need....





1972 V8 Jago

1980 Z750

View User's Profile Visit User's Homepage View All Posts By User U2U Member
scudderfish

posted on 15/3/12 at 01:30 PM Reply With Quote
quote:
Originally posted by coozer
5.7L V8, all the horses and torque you will ever need....


And then put a supercharger on it.

View User's Profile View All Posts By User U2U Member
bi22le

posted on 15/3/12 at 01:33 PM Reply With Quote
Easy answer to this . . . . . NOZ!!

Ill take my ticket, grab a beer, crisps and find my seat. This should be a gooood fight!








Track days ARE the best thing since sliced bread, until I get a supercharger that is!

Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1

Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I

View User's Profile View All Posts By User U2U Member
T66

posted on 15/3/12 at 01:49 PM Reply With Quote
For me, the turbo is probably the easier of the two to find & purchase. Try finding a decent price Rotrex that doesnt make you whince....


Power delivery of the SC is in my view , far more usable than a turbo engine. My old saab was very rapid, and the lag wasnt too bad, but driving it quick on the bends required some pre-bend thought to keep it on boost - ie left foot braking or just keeping it nailed.


Longevity of the SC is a consideration, quite complex is the Rotrex compared to a turbo, apart from hillclimb use I would go for a turbo, based on ease of purchasing/replacement/cost.


What engine are you talking about Scott ?






View User's Profile View All Posts By User U2U Member
scootz

posted on 15/3/12 at 02:03 PM Reply With Quote
quote:
Originally posted by T66
What engine are you talking about Scott ?


The 2.8 M52TU lump in the Z3

Been looking at NA tuning for it and there's not a lot of aftermarket support... and those parts that are available are stupidly expensive and don't add a great deal.

I understand that the internals are good for up to 400 with a blower... and there are reasonably priced bolt-on kits available (of both FI flavours).





It's Evolution Baby!

View User's Profile View All Posts By User U2U Member
scootz

posted on 15/3/12 at 02:10 PM Reply With Quote
What about intercoolers... are they essential, or only once you start going for serious boost?





It's Evolution Baby!

View User's Profile View All Posts By User U2U Member
beagley

posted on 15/3/12 at 02:13 PM Reply With Quote
According to Corky Bell, they aren't mandatory but they can dramatically increase the life of the blower and engine. I forget the formula that determines the level of boost that can be run before you starting getting pre-ignition but its in that Supercharged! book by Mr. Bell.





I'm not scared!!! I'm just marking my territory.

View User's Profile View All Posts By User U2U Member
jeffw

posted on 15/3/12 at 02:41 PM Reply With Quote
I know of a number of non-intercooled Supercharged cars which are meant to make big numbers and....don't. Simple because the temp of the air coming into the engine is so high.






View User's Profile View All Posts By User U2U Member
FASTdan

posted on 15/3/12 at 02:53 PM Reply With Quote
Intercoolers are a must IMO.

I'd say a turbo is far cheaper and easier. OK you have exhaust plumbing but thats all pretty 'basic' compared to having custom pulleys machined, sorting belt tensions, pulley sizes bla bla bla. Rotrex seems popular now and I can see why but the prices are phenominal compared to a £400ish garrett.





NEW danST WEBSITE NOW LIVE! Bike carbs, throttle bodies and more......

http://www.danstengineering.co.uk/

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile E-Mail User View All Posts By User U2U Member
CRAIGR
Contributor






Posts 2760
Registered 30/8/05
Location Sussex
Member Is Offline

Photo Archive Go!
Building: Built v8 striker/blade fury/ R1 westy,now zetec we

posted on 15/3/12 at 06:14 PM Reply With Quote
quote:
Originally posted by scudderfish
quote:
Originally posted by coozer
5.7L V8, all the horses and torque you will ever need....


And then put a supercharger on it.




Like this ??



http://www.youtube.com/watch?v=qSJVi1mPjZQ&feature=player_embedded

View User's Profile View All Posts By User U2U Member
T66

posted on 15/3/12 at 06:31 PM Reply With Quote
If the boost is low, then you could feasibly get away with no IC, its about how much the engine starts detonating when your giving it big licks. If your looking for 400bhp, the Rotrex you had on the BB engine wouldnt make that. Turbo it with a Mitsubushi td04 19t from a Saab/Volvo

For what ICs cost, its easier to fit one, there will be room up front to fit one in.






View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.