number-1
|
| posted on 25/8/12 at 05:49 PM |
|
|
What wheels are these?
Can anyone shed some ideas as to what these wheels are? They are R13 with 140pcd (i think)
[Edited on 25/8/12 by number-1]
|
|
|
|
|
jollygreengiant
|
| posted on 25/8/12 at 05:56 PM |
|
|
Look like the classic 'Revolution' 4 spoke.
and heres a link to a page of them linky dinky clicky herey
[Edited on 25/8/12 by jollygreengiant]
Beware of the Goldfish in the tulip mines. The ONLY defence against them is smoking peanut butter sandwiches.
|
|
|
snapper
|
| posted on 25/8/12 at 06:10 PM |
|
|
Never mind the wheels ( yes Revolutions) what is the car
Looks retro
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
Davey D
|
| posted on 25/8/12 at 06:14 PM |
|
|
As above, they are revolution wheels.they are often seen on minis and other classic cars
|
|
|
number-1
|
| posted on 25/8/12 at 06:21 PM |
|
|
Cheers for the replies folks.
The car is now a mid engine BEC. It started as a formula vee Elden chassis single seater race car. Its had a porsche lump in the back before the
gsxr1100 engine. Its almost ready for the track. Im having issues finding tyres to fit...R888s etc as the tyres on it now are competition
slicks/wets
There should be a few pics in my archive.
|
|
|
maccmike
|
| posted on 25/8/12 at 07:17 PM |
|
|
did you sort the gear selection and make your track day?
|
|
|
number-1
|
| posted on 25/8/12 at 07:30 PM |
|
|
Hello mate. I got the gear change cable and fitted it but still couldn't change gears. The clutch was knackered so new clutch, strip clean
rebuild carbs with new jets and it works. I didn't get it done in time for the track day unfortunately. I need to sort tyres out and a few
niggles before I shake it down on track 
|
|
|
