scootz
|
| posted on 11/8/16 at 05:18 PM |
|
|
Tech Drawing Favour
Can anyone with time on their hands please assist with a tech-drawing that I can hand into a machinist?
I've tried, but my freehand drawing / maths skills are not accurate enough for working drawings.
I'm looking for the following:
Circle with a diameter of 137mm.
5 x 16.2mm holes within the circle at a PCD of 114.3.
Thanks V much in advance.
It's Evolution Baby!
|
|
|
|
|
prelude1980
|
| posted on 11/8/16 at 05:41 PM |
|
|
i can help you if you like.
how thick is the material as well?
Speed has never killed anyone. Suddenly becoming stationary... that's what
gets you.
https://www.topcashback.co.uk/ref/dodd1980
|
|
|
scootz
|
| posted on 11/8/16 at 05:46 PM |
|
|
Thank you!
It's 13mm.
It's Evolution Baby!
|
|
|
prelude1980
|
| posted on 11/8/16 at 05:54 PM |
|
|
You can download it here
Drawing
Speed has never killed anyone. Suddenly becoming stationary... that's what
gets you.
https://www.topcashback.co.uk/ref/dodd1980
|
|
|
scootz
|
| posted on 11/8/16 at 06:05 PM |
|
|
Thank you so much! Really appreciate it!
It's Evolution Baby!
|
|
|
prelude1980
|
| posted on 11/8/16 at 06:07 PM |
|
|
glad to help
Speed has never killed anyone. Suddenly becoming stationary... that's what
gets you.
https://www.topcashback.co.uk/ref/dodd1980
|
|
|
redscamp
|
| posted on 11/8/16 at 11:29 PM |
|
|
just remember to mark up 114.2 to 114.3 with a biro (i never get a drawing right first time either)
|
|
|
scootz
|
| posted on 12/8/16 at 09:25 AM |
|
|
Oops... I missed that too! Will get the biro out!
It's Evolution Baby!
|
|
|
prelude1980
|
| posted on 12/8/16 at 10:12 PM |
|
|
my apologises, drawn correctly but text was wrong, very embarrassing
Revised drawing
Speed has never killed anyone. Suddenly becoming stationary... that's what
gets you.
https://www.topcashback.co.uk/ref/dodd1980
|
|
|
scootz
|
| posted on 13/8/16 at 11:47 AM |
|
|
Thanks again for all your help!
It's Evolution Baby!
|
|
|
