paul v6
|
| posted on 8/10/05 at 03:06 PM |
|
|
MNR body panels??
I really like the bulges on the mnr bonnet/scuttle and would like to use them if possible, are the mnr chassis the same dimensions as the book chassis
allowing there use?
Many thanks
Paul
|
|
|
|
|
G.Man
|
| posted on 8/10/05 at 03:17 PM |
|
|
May be wrong, but I dont think they will sell bodywork to people not building an MNR car...
Opinions are like backsides..
Everyone has one, nobody wants to hear it and only other peoples stink!
|
|
|
mangogrooveworkshop
|
| posted on 8/10/05 at 03:37 PM |
|
|
tHE VOTEX BODY WORK IS ONLY AVAIL TO VORTEX BUILDERS
|
|
|
Jon Ison
|
| posted on 8/10/05 at 03:39 PM |
|
|
thats mardy, just an opinion.
|
|
|
G.Man
|
| posted on 8/10/05 at 04:56 PM |
|
|
quote:
Originally posted by Jon Ison
thats mardy, just an opinion.
See below
Opinions are like backsides..
Everyone has one, nobody wants to hear it and only other peoples stink!
|
|
|
Jon Ison
|
| posted on 8/10/05 at 04:58 PM |
|
|
no problem.......
|
|
|
JoelP
|
| posted on 8/10/05 at 05:11 PM |
|
|
that would be because the vortex has an unusual scuttle look, they dont want loads of non MNR cars looking like vortexs.
|
|
|
paul v6
|
| posted on 8/10/05 at 06:22 PM |
|
|
Mmmm!! May have changed my mind, having found a pic of what those bulges look like from a driving position, still like the look otherewise though.
Paul
[Edited on 8/10/05 by paul v6]
|
|
|
smart51
|
| posted on 9/10/05 at 12:07 PM |
|
|
the newer VortXes are 60 or 80mm wider than a book chassis. The double bubble scuttle wouldn't fit.
|
|
|
