Kook
|
| posted on 5/12/06 at 11:55 PM |
|
|
Unipart electronic ignition module
hello again ... I got hold of a 1.6 Pinto ( From a 82 sierra ) last week with electronic distributor. Is this ( Link below ) The correct module for
it ? If not does anyone know the part number and a good place to buy ?
http://cgi.ebay.co.uk/Ford-Escort-XR3-Morgan-Electronic-Ignition-Module-R20_W0QQitemZ130036008026QQihZ003QQcategoryZ21654QQssPageNameZWDVWQQrdZ1QQcmdZ
ViewItem?hash=item130036008026
Gonna prob be bugging this forum with alot of electical questions as am having trouble getting my head round it at min ... Am just wanting to get the
engine ticking over at the min.
Cheers
|
|
|
|
|
Dusty
|
| posted on 6/12/06 at 12:04 AM |
|
|
Not that one I think. If it's a bosch dizzy with vacuum unit and three wires, brown earth and green/yellow and black/red wires on it then you
need the inductive amp.
NS Dev if floggin two of the right one further down this page. Pinto water pumps and ign amps.
[Edited on 6/12/06 by Dusty]
|
|
|
Kook
|
| posted on 6/12/06 at 12:22 AM |
|
|
Cheers .. Not sure how i missed his advert as was looking at most today ... 
|
|
|
Dusty
|
| posted on 6/12/06 at 03:08 AM |
|
|
Should have six pins and the set looks like the pic.
 
Rescued attachment induct.jpg
|
|
|
