bigandy
|
| posted on 23/4/07 at 12:33 PM |
|
|
Rather random - 3D scanning
Afternoon folks.
I was just wondering if anyone knew of any places that are able to do 3D scans of things? I am after a point cloud, or 3D surface model that I can
import into a CAD package (Solidworks) and manipulate somewhat.
The only important considerations really, is the objects to be scanned are to be heads (specifically, my head!)
Any ideas?
Cheers
Andy
Dammit! Too many decisions....
|
|
|
|
|
liam.mccaffrey
|
| posted on 23/4/07 at 12:52 PM |
|
|
my suggestions may not be that helpfull to you, but
you could cast your face/head in a splitable rubber mould. Make a plaster head of yourself. Cut it into say a few hundred thin slices. scan them and
vectorise, import to CAD and loft the sections to get a 3d model.
or try
thishttp://www.hackaday.com/2006/12/21/laser-3d-scanning-with-a-webcam/
Build Blog
Build Photo Album
|
|
|
carlgeldard
|
| posted on 23/4/07 at 01:00 PM |
|
|
These guys could do it, But it wouldn't be cheap
Link
|
|
|
Mr Whippy
|
| posted on 23/4/07 at 01:00 PM |
|
|
quote:
Originally posted by bigandy
Afternoon folks.
I was just wondering if anyone knew of any places that are able to do 3D scans of things? I am after a point cloud, or 3D surface model that I can
import into a CAD package (Solidworks) and manipulate somewhat.
The only important considerations really, is the objects to be scanned are to be heads (specifically, my head!)
Any ideas?
Cheers
Andy
is this for a giant status of yourself? 
Fame is when your old car is plastered all over the internet
|
|
|
Peteff
|
| posted on 23/4/07 at 03:21 PM |
|
|
Or even a statue?
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
peterriley2
|
| posted on 23/4/07 at 05:56 PM |
|
|
i know where you could get it done, but its not near you- exeter uni, devon has a 3d scanner and a 3d printer and i know you can do heads on both
machines. you should phone up some unis near you, you want one that does product design of some kind- i dont know if they will all have such advanced
CAD machines though... youll have to find out then beg them to use it!
Joel
If you dont respect yourself, dont expect respect from anyone else
Live your dreams, dont dream your life
Women only want you for one thing- everything!
|
|
|
bigandy
|
| posted on 23/4/07 at 06:57 PM |
|
|
OKay, cheers for the info folks, keep it coming if anyone knows of anywhere!
I am actually looking for a proper 3D model of my head to use as a virtual manekin. I seem to have a rather odd shaped head, and most sunglasses I
have tried, either don't fit properly, or look rubbish. So, as I design things for a living, I thought I could do a bit extra at home, and
design my own custom glasses. I have access to an SLA machine for prototyping, and I know of several places that do low low volume plastic parts,
just not the 3D scanning bit.
Well, I tell I lie, we have a probe for collecting surface data from tools, but that is designed to work in conjunction with out rather large NC
machining centre, and you can forget me putting my head in that when it is running!
Exeter might be doable though, I'm off down that way in July 
Just thought, maybe this is a classic case of using a sledgehammer to crack a nut? (not literally!)
Cheers
Andy
Dammit! Too many decisions....
|
|
|
Shaw
|
| posted on 23/4/07 at 08:57 PM |
|
|
try these guys they were at work today doing some training, said they would use a HandyScan3D
http://www.measurement-solutions.co.uk/
|
|
|
