cct7kitcars
|
| posted on 21/5/07 at 03:05 PM |
|
|
girling master cylinders
im trying to buy a load of the .625 and .700 master cylinders direct but i need the girling part numbers can any one help
Life should not be a journey to the grave with the intention of arriving safely in an attractive and well preserved body, but rather to skid in
sideways, Chardonnay in one hand, Tequila in the other, body bearing battle scars and totally worn out, screaming- WOO HOO!! What a Ride!
|
|
|
|
|
stevec
|
| posted on 21/5/07 at 05:19 PM |
|
|
I found this that has part numbers, hope its of some help.
link
|
|
|
britishtrident
|
| posted on 21/5/07 at 06:04 PM |
|
|
The 0.625" was standard fit on the Hillman Imp on both brake and clutch.
The 0.7" was standard fit on the Sunbeam Imp Sport & Sunbeam Stiletto & Singer Chamois Sport brake only ----- (the Sport models had a
servo )
[Edited on 21/5/07 by britishtrident]
|
|
|
rjs
|
| posted on 21/5/07 at 06:31 PM |
|
|
this is a girling 0.70 & the part number on it sure looks like 64673554 but its not to clear to read ,
[Edited on 21/5/07 by rjs].JPG)
|
|
|
