markf
|
posted on 27/5/07 at 09:43 AM |
|
|
exhaust manifolds
does any one know of a company that supplies exhaust manifolds in seperate part, to diy fit and weld
cheers
mark
|
|
|
TangoMan
|
posted on 27/5/07 at 09:53 AM |
|
|
You could always buy the flange and some bends and make it yourself.
That's what I did.
Summer's here!!!!
|
|
24vseven
|
posted on 27/5/07 at 10:08 AM |
|
|
deamon tweeks sell these
they sell flanges seperatly to a manifold kit cos thats just bits of bent tube
they also sell the colectors
hope this helps
|
|
grahamgg
|
posted on 27/5/07 at 10:08 AM |
|
|
mnr's locostparts.net sell flanges for £15 .if you phone them im'e sur they will sell you an exhaust not welded up here is their link..
link
|
|
MikeR
|
posted on 27/5/07 at 11:11 AM |
|
|
the locost parts site run by robin hood (who are now someone else) used to sell weld your own manifolds .........
just can't for the life of me remember the web site.
|
|
NS Dev
|
posted on 27/5/07 at 11:28 AM |
|
|
quote: Originally posted by markf
does any one know of a company that supplies exhaust manifolds in seperate part, to diy fit and weld
cheers
mark
Do you mean already cut end fitted etc of just an armful of bends and a flange to weld them to?
The "diy manifold" kits that are sold by many including custom chrome etc are a rip off, as the work involved is extensive and effectively
they are an expensive way of buying an armful of bends.
On the other hand, if you buy one where you literally just have to weld it together, the you may as well buy a finished manifold, because the work is
all in getting the fits right, and the actual welding takes very little time.
the company that made my bends in stainless to my specification was these:
SDW Light Fab
who mandrel bent enough tube at exactly the diameters and lengths I needed, to make 2 complete 4-2-1 XE vauxhall manifolds, for £200, which is an
absolute bargain.
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
oadamo
|
posted on 27/5/07 at 01:29 PM |
|
|
theres a company by me that forms tubes.i just raid there skip its full of all types of tube and bends. have a look in the yellow pages for somewhere
by you
adam
|
|