02GF74
|
 posted on 23/11/07 at 02:58 PM |
|
|
help me find the supercharged crossflow
somewhere out there on the web there is an article about fitting a supercharger to a crossflow - please help me find it.
From memory if was put into a 7 type car the person's name is Paul Ferraterro or similar, I think. (I could be wrong about the name). Also
could be mazda s/g.
But for sure he is a black smith and does iron work and stuff and his site has the s/g xflow.
ta.
|
|
|
|
|
worX
|
| posted on 23/11/07 at 03:05 PM |
|
|
Found some stuff on MG forum, some stuff on 'A' Series engines, and some stuff on american crossflows, but nothing specific I'm
afraid! and nothing tied in with a name like the one above...
You could have a read of this though...
http://www.practicalclassics.co.uk/forum/viewtopic.php?p=19708&sid=3a8c4af29ba5dabc4f262cee23a95692
Steve
|
|
|
procomp
|
| posted on 23/11/07 at 03:18 PM |
|
|
Hi i seem to remember one at the WSCC trackdays at mallory park. I think he entered two of them. It might be a place to start a search.
Although if it's the same car i dont think it ever ran for more than 3-4 laps befor experiencing problems.
HTH cheers Matt
|
|
|
F20 POWERED RUSH
|
| posted on 23/11/07 at 03:34 PM |
|
|
O2 GF 74 have just seen your post, Allards used to produce a Supercharger for the Crossflow during the 70s etc.
Out of interest i have just put a book on e-bay( Tuning Escorts and Capris ), Which has a short chapter on Supercharging theCrossflow.
|
|
|
pewe
|
| posted on 23/11/07 at 03:58 PM |
|
|
Guy Croft up in Lincs. has lots of experience on supercharging. See www.guy-croft.com - if nothing relevant drop him an email.
Cheers, Pewe 
|
|
|
iank
|
| posted on 23/11/07 at 11:25 PM |
|
|
Some good information in this thread.
http://www.locostbuilders.co.uk/viewthread.php?tid=11150&page=1
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
