i priced up polyurethane bushes at deamon tweeks an was a little surprised at how much they cost , £15 ish each , i really dont know anything about
bushes an i think/hope i was looking at the wrong ones
what should i be looking for ?
where did you get yours from ?
how much did they cost?
thanks Ben
i think demon eeks are quite dear any way aint they try rally design think thats where mine were from
I got nylon ones made up from a guy on ebay who makes quite a few bits for locosts and haynes roadsters, complete set for the front cost about £30 I think. Seem very well made, no doubt someone will be along in a minute to say that nylon is rubbish though! Offhand, I think it was Dave Oxley....
Where do I get my bush from? Mmmmmmmmmmmm.
Try Wisbech engineering, i think they supply GTS with their bushes, if their bushes are as good as the rest of their engineering work, should be ok
quote:
Originally posted by hampshe
Try Wisbech engineering, i think they supply GTS with their bushes, if their bushes are as good as the rest of their engineering work, should be ok
Procomp supply proper polyflex (or is it superflex) ..... anyway, proper what evers.
Guess what i've got
so the wisebech ones work out at about 4.74 each if you buy the inner and outer sleeves and bush halves.
Anyone got a price on the procomp ones?
The Wisebech one are hard and not suitable for de dion, live axles mountings, also the width of the metal tube is narrow compared to the others
available and it's a very tight squeeze getting a 25mm tube welded properly to it.
Cheers
David