Board logo

Stainless Exhaust Parts
CaptainJosh - 21/10/10 at 10:57 AM

Hey Guys

I'm looking for a company that sells stainless exhaust components so I can make my own manifold. Specifically I need a 4:1 collector with either a 1 3/4" or 2" outlet and anything LESS than 1 1/2" primary's.


Everything I've found so far want to charge me atleast £200 for the component or simply don't stock components which arn't stupidly sized.


Any help?
Cheers,
-Josh

boggle - 21/10/10 at 11:07 AM

have you got a flange?

CaptainJosh - 21/10/10 at 11:37 AM

Yup, I got one laser cut locally, saved alot of work and was very accurate

AdamR - 21/10/10 at 12:00 PM

Try OJZ Engineering. They sorted me out with all the bits I needed, including a pair of pressed collectors with 2" outlets. Pressed collectors do not flow quite as well as merge collectors, but are a fraction of the cost.

Here's a not-very-good pic of my offside headers - you can just about see the OJZ collector.
Description
Description

CaptainJosh - 21/10/10 at 03:55 PM

quote:
Originally posted by AdamR
Try OJZ Engineering. They sorted me out with all the bits I needed, including a pair of pressed collectors with 2" outlets. Pressed collectors do not flow quite as well as merge collectors, but are a fraction of the cost.

Here's a not-very-good pic of my offside headers - you can just about see the OJZ collector.
Description
Description


I'll give them a call tommorow, cheers

Chippy - 21/10/10 at 07:06 PM

Second OJZ very helpful guy's, and there stock is monumental. HTH Ray