Board logo

racetech temp sender
omega0684 - 27/5/09 at 03:52 PM

i need to get a racetech temp sender so that i can get a reliable reading of engine temperature on my racetech gauge obvioualy on the dash.

they come in three threads, M10x1.0, M14x1.5 and M16x1.5, how do i know which one to buy or is is a case of re-threading the mount in the pinto block, to suit (i think the into block thread is 1/8 npt)

also it has another thread where you attach the wire for the sender, i have a female spade terminal on mine, again where can i get an adapter from


cheers

[Edited on 27/5/09 by omega0684]

Flamez - 27/5/09 at 03:55 PM

quote:
Originally posted by omega0684

also it has another thread where you attach the wire for the sender, i have a female spade terminal on mine, again where can i get an adapter from


cheers


Cut off the spade and re-crimp a terminal [round] connector on.

BenB - 27/5/09 at 04:08 PM

You can usually get thread adaptors to suit. Re the connector- that's easy. As said cut it off and solder on a new one