Board logo

Supplier recomendation required......
carpmart - 8/6/09 at 01:41 PM

Hi All

Does anyone know as supplier who sells 13 teeth front sprockets for a 919 Fireblade engine? I can get 14's pretty easily but no lower?

Also, I need a chain that is quite short 36 links so 72 rollers. I have been using a relatively low priced one but I've suffered bad chain stretch and the resultant sprocket wear. What is a good 530 O or X ring chain and where is the best place to buy from?

Thanks!

minitici - 8/6/09 at 04:40 PM

Might be a bit difficult to find as it does not appear to be a stock fitment on any bike.
JT catalogue Type in JTF333.13
Best to try B&C Express and see if Renthal make one
(possibly 315a-530-13 ?)

carpmart - 8/6/09 at 04:45 PM

quote:
Originally posted by minitici
Might be a bit difficult to find as it does not appear to be a stock fitment on any bike.
JT catalogue Type in JTF333.13
Best to try B&C Express and see if Renthal make one
(possibly 315a-530-13 ?)


Thanks for your reply!

B&C was my first point of call and they don't do anything!

If I ordered a few, say 10, is it something I can get made on a one off basis?

andkilde - 8/6/09 at 06:13 PM

I think these guys might be able to help:

http://www.sprocketspecialists.com/

Also, try popping in to www.fsae.com and searching/asking the kiddies for recommendations.

Cheers, Ted

NS Dev - 8/6/09 at 08:31 PM

JB Gears in leeds.

They made the sprockets for my autograsser, and at £90 delivered for a pair of 16t driver and a pair of 38t driven, I couldn't fault them, plus they were superbly made.

carpmart - 9/6/09 at 10:16 AM

Thanks for the replies.

I will call JB Gears in Leeds and see how I get on!